Gasoline internal combustion rail cutting machine honda engine rail cutter

Gasoline internal combustion rail cutting machine honda engine rail cutter :

Gasoline internal combustion rail cutting machine honda engine rail cutter Product introduction: 

The Internal Combustion Rail Cutting Machine also named as rail cutter, track cutter ,rail saw ,is used to cut the rails in pieces .It is very popular in the railway market. The gasoline engine is Honda, and is very convenient to be used without electric.

Our company is a leading manufacturer specialized in various railway maintenance equipment in China. Products including rail cutter, rail grinder, rail drilling machine ,track lifting and lining machine, railway ballast tamper ,railway bolt wrench, rail bender, rail gap adjuster, cutting disc, grinding stone ,and etc.

Gasoline internal combustion rail cutting machine honda engine rail cutter Main Parameters:

Gasoline internal combustion rail cutting machine honda engine rail cutter  Basic Structure:

Swing arm shafts and Suites for rolling friction to minimize wear and tear and prolong life

The swing arm ,the cutting arm and the belt pulley are made of cast aluminium alloy, the quality is light and the strength is high

The internal combustion engine seat is a split cast aluminum alloy to reduce weight

Deformation mechanism is additionally arranged auxiliary wheel;to ensure smooth implementation of the ground

The clamping mechanism has the function of preventing derailment. The rail cutting machine is arranged on the rail , and the center of gravity of the rail cutting machine is coincident with the central axis of the rail loose clamping screw. Rail cutting machine does not tilt.

Gasoline internal combustion rail cutting machine honda engine rail cutter  Maintenance and Repair:

1,Grease the swing arm and the long shaft, and inject lubricating oil into the lubricator regularly

2,After cutting the rail machine for 500 hours, the main shaft bearing should be removed and replaced with grease

3,The swing arm and the cutting arm used the threaded pin connection, the factory has a good tune, when worn after loosening,locking nut, screw thread pin , adjust the mechanical axial clearance ,which can mutually rotate and axially move so far, then ,nut

4, V belt tensioning adjustment with two spiral rotation angle six

5,No throwing or throwing during use or transportation

6,For a long time, should be placed in ventilated , dry and non corrosive gas warehouse, the internal combustion engine should be released fuel

7,The thin grinding wheel should be dampproof, anti-collision and anti pressure.

8,The recommended ambient temperature of the gasoline engine is between -15~40 degrees

Gasoline internal combustion rail cutting machine honda engine rail cutter Pictures:

 Gasoline internal combustion rail cutting machine honda engine rail cutter Packages:

 Customer Visting for Gasoline internal combustion rail cutting machine honda engine rail cutter :

Company for Gasoline internal combustion rail cutting machine honda engine rail cutter :

Certifacations for Gasoline internal combustion rail cutting machine honda engine rail cutter :

Contacts for Gasoline internal combustion rail cutting machine honda engine rail cutter :

Any questions,please feel free to contact Kristin any time.

QQ: 2881248858

Skype:sabrina(at)

Mobile:+86 15206702189

What's app:+86 15206702189

Wechat:+86 15206702189

Email:hwzg003(at)

Tel: 0086-537-2883179

Fax: 0086-537-2585538