Introduction:

FM610 series metal pipe flow meter has simple structure, reliable operation, wide applicable temperature range, high precision, as well as the low price. This series type flowmeter for instructions given, have into the out, under the right into the left out and in side out of the three type of installation. Can be widely used in national defense, chemical industry, petroleum, metallurgy, electric power, environmental protection, pharmaceutical and light industry and other departments of the liquid, gas flow measurement.

Sensor part of the instrument can be used stainless steel cr18niti (1), molybdenum titanium cr18ni12mo2ti (0, 1 cr18ni12mo2ti), and lined with ptfe material, according to user requirements can also be made of special material, to adapt to the corrosive fluids (such as chlorine, salt water, hydrochloric acid, nitric acid and sulfuric acid, etc.) of the flow measurement. 

Technical parameters:

asuring range : Liquid : 2.5 ~ 160000L / h
Gas : 0.07 ~ 4000m3 / h (0.1013MPa 20 °C)
2.turndown ratio : 10:1
3.Accuracy class : 1.5% ; 2.5%
4.the maximum working pressure of 1.6MPa, 2.5MPa, 4.0MPa, 6.4MPa
Note: According to user needs but also to produce more than 6.4MPa pressure flowmeter
5.Temperature : Fluid temperature : -20 ~ +300 °C ( the plastic lined flowmeter fluid temperature is 0 ~ +80 °C)
Ambient temperature : -20 °C ~ +50 °C

6.the liquid medium viscosity : Φ15 <5mPa / S; Φ25 ~ Φ150 <250mPa / S
7.Connection: flange connection
Flange Standard 1.6MPa, 4.0MPa, 6.4MPa reference standard HG20594-97
Jacket insulation type of heating pipe connection flange DN15
Note: Special specifications according to user requirements
8.total height : 250mm
9.Protection: IP65