OIL510 type automatic infrared oil measuring instrument
USD $3,580 - $4,000 /Set
Min.Order:1 Set
Lixian Instrument Scientific Co., Ltd.
Features:
1. The small cross contamination: pretreatment system USES completely anticorrosive material, not oil.
2. High degree of automation: automatic sampling, extraction, measuring, drainage, clean, data storage, printing, save manpower, save time, at the same time reduces the chance of operation personnel contact harmful reagent, more secure.
3. The automatic zero: baseline analysis results are accurate and stable.
4. A patent technology of oil/water separation membrane, patent no. ZL 2005 2 0023087.0
5. Three measures: to measure the content of total oil and measuring the content of oil and animal and plant oil.
6. The wavelength automatic correction: avoided in instrument experience extreme (violent vibration or falling) occurs after the manual correction of trouble.
7. Applicable reagents variety: not only carbon tetrachloride, S - 316, freon, tetrachloroethylene, etc, are applicable to the instrument.
8. High extraction efficiency, use of extraction technology of air disturbance, extraction rate is more than 95%.
9. Automatically dilute concentration: can set arbitrary dilute concentration ratio.
Technical parameters
Baseline stability: real-time automatic zero adjustment (eliminate baseline drift effects)
Wave number range: 3400 cm - 1 ~ 2400 cm - 1 (that is, the wavelength of 2941 nm to 4167 nm range)
Absorbance range: 0.0000 ~ 2.0000 AU, the light transmittance (100 ~ 1) % T
Measuring range: 0.02 ~ 500 mg/l (the oil content in carbon tetrachloride)
The minimum detection limit: the DL < 0.02 mg/l
The accuracy of error: 2% or less
The linear correlation coefficient, r > 0.999
Repeatability: less than 2%
Stability: less than 5%
Analysis time: 10 minutes
Sample size: 1000ml the following arbitrary choice
Extraction ratio: 1:1, 1:2, 1:3, 1:4, 1:5, or 20:1, 20:2, 20:3, 20:4, 20:5, etc.
Power supply and power consumption: AC220V 10%, 50HZ, 100VA
Extractor unit size: 427mm (L) * 435mm (W) * 753mm (high)
Extractor unit weight: 25kg
Host size: 450mm (long) x 400mm (wide) x 130mm (high)
Host weight: 18kg