OL 1020 infrared spectroscopy analysis oil analyzer

Features:

1. water and organic phase separation device (patent technology)

Uneven for oil content in water samples, use first reagent extraction, then the separation device make organic reagents and particulate matter and water separation, reoccupy anhydrous sodium sulfate to remove traces of water. With reverse pressure flush reagent extraction device, to prevent clogging and eliminate the cross contamination, easy to use, low operating cost.

2. continuous automatic measurement of animal and plant oil (patent technology)

Continuous automatic measurement of total oil, oil, and animal and plant oil, three data obtained at the same time.

Using magnesium silicate adsorption column adsorption dynamic, vegetable oil, computer real-time message magnesium silicate remaining amount.

3. reagent recovery (patent technology)

Poisonous liquid reagent automatically collect,

Technical indicators

Measuring method: three wavelength infrared spectrophotometry

Measurement items: continuous automatic measurement of total oil, oil, animal and vegetable oil

Sampling method: the sampling bottle is directly measured, without water sample transfer (HJ/T91-2002).

Sample grade: 10

Extraction reagent: carbon tetrachloride or four vinyl chloride

Automatic extraction ratio: can be set according to user needs (0.01-100)

Separation: membrane separation

Except for water: anhydrous sodium sulfate in addition to water

Reagent recovery: automatic collection of liquid reagent, using active carbon adsorption gas

Standard sample preparation: according to the need of automatic preparation of different concentrations of standard sample

Measuring range: 0-50000mg/L, super automatic dilution.

Resolution: 0.001mg/L

Detection limit: 0.005mg/L

Reproducibility: RSD<2%

Extraction rate: >95%

Accuracy: 2%

Water sample dosage: 10-1000mL

Wave number range: 3400-60000px-1

Absorbance range: 0 ~ 2.0000AU

Wave number accuracy: 1 cm-1

Wave number repeatability: 1 cm-1

Measurement time: 5 minutes

Operation mode: touch screen computer control

External power supply: 220V + 10%, 50Hz

Host size: 640 (L) x 380 (B) x 480 (H) mm

Host weight: 30kg

Auto sample size: 700 (L) x 500 (B) x 670 (H) mm

Automatic sampler weight: 40kg