GP-2000D LED Industrial Radiographic Film viewer is a new product developed by JB / T4730-2005 "Non-destructive Testing of Pressure Equipment" and the latest standard of GB / T 19802-2005 "Industrial Radiographic Film". GP-2000D film light combines the advantages of domestic and international industrial film light, using the most advanced digital electronic technology and the latest ultra-high brightness high-power LED light source, to overcome the traditional concept of film light low contrast, Uniformity is low, fast decay, short life and other shortcomings, nice shape, user-friendly operation, will certainly be your best commentator on the helper.

Features

1, GP-2000D adopts all-digital control mode, which is more reliable, more stable and has longer service life than the mechanical control lamp. It is more flexible, more convenient and more precise. Tap a few times, you can tune out the light they need.

2, GP-2000D according to the strength of light, black and white density value of the film; dimming can also be based on black and white density value, quickly out of the film needs light. This is the first case in the country.

3, GP-2000D has a new real-time temperature acquisition system to achieve real-time protection of the light source. The user can press the "storage" button and hold for more than 2 seconds, the panel will display the digital tube its internal temperature. When the viewfinder lamp often touch the part of the shell temperature reaches 60 degrees, the viewfinder lamp automatically adjusts the brightness of light to a minimum, while the panel digital tube flashing "H H" symbol. When the temperature of the viewing lamp falls to normal, it automatically returns to the original brightness, and the display of the digital tube on the panel automatically returns to the original black-and-white density value.

4, the revolutionary use of the United States the most advanced imported crystal frames, large chips and other white light source technology, special super-power LED light source, the real cold light source, super bright LED, observe the screen up to 125,000cd / M2 (388,000Lux), can be clearly observed in more than 5.0D black negatives on the film defects, the uniformity of 0.9 or more.

5, the observation screen material used by the Japanese three-Ling Yang Co., Ltd. production of acrylic panels, with a glass beyond the light transmission, good diffuse scattering properties, and durable, no deformation, no discoloration.

6, according to the physiological characteristics of the human eye, limited to the color temperature of the LED in the 7000K, not dazzling, even for a long time to watch, the eyes are not easy to fatigue.

7, the use of PWM low-voltage digital electronic continuous dimming technology, in 5% -100% wide range of brightness adjustment, so you can adjust as needed.

8, using the design for the film light constant current drive mode, to a greater extent to ensure the normal work of the LED, so as to achieve the purpose of extending life, foot switch control, energy saving and environmental protection, and further protect the safety of the user.

9, with a unique design of the cooling system, whether in foot switch mode or manual mode, continuous work 12 hours, photographic film will not curl.

10, viewing the film lamp with a removable magnifying glass to facilitate the identification of defects. If you do not have a magnifying glass, you can easily close the magnifying glass on the viewing light film above the film does not affect the line of sight. The specific method of operation shown in Figure 1 (release the adjustment knob to rotate the magnifying glass frame can be used to open or close the magnifying glass, the use of two knobs must be tightened so that the magnifying glass fixed so as not to affect the film).

Technical parameters

Highest luminance 125,000Cd/M2 (388,000LUX)

Film observable darkness ≥5.0

Average color temperature 7000K

Largest area of observation screen 220×80mm

Observation evenness ≥0.9

Power 47-63Hz/170-230VAC

Wattage 120W

Magnifying glass Active area - 130×90mm

Workable Circumstances -60℃ ~  60℃

Device Size 430×220×130mm

Packing List

GP-2000D film viewer 1pc

Foot Pedal 1pc

Light screen 2pcs

Backup fuse 2pcs

User Manual & Warranty Card 1set

Warranty Policy

1. We guarante every GP-2000D will only be sent out after being strictly inspected.

2. Qingrui Instrument provides our customer with a 1-year warranty and durable maintaince & repair support in accordance with the statement in the warranty card.

Dear customer:

  We ,Xi’an Yima Opto-electrical Technology Com.,Ltd. is an integrated economic entity of R&D,manufacturing and trading with over 20 years of history .

  Our business scope covers various fields such as biochemical analysis,environmental protection,industrial testing, bioscience,medical apparatus and instruments,internet technology and some frontier science.

  Through a long-time development,we own a national resources system of various professional talents , abundant supply for various components &parts and special materials, full producing &processing equipments , strong Technological standardization and a complete quality assurance system.

  If you need OEM or ODM in manufacturing ,scientific research , market development and or you want to build your own brand in your country, it’s our honor to cooperate with you.In this way ,we have developed many products for our customers from the USA, Europe and South Africa and got good feedback on Alibaba.