Machine size:
1. Experimental space: 600X450X400 (WxDxH) m/m
2. Outer box size: 1070X570X1190 (WxDxH) m/m
Power supply: 220V single phase 3.1KW 50/60HZ
Material used:
1. The laboratory adopts imported acid and alkali resistant high temperature and never aging PVC board with a thickness of 6m/m and a durable temperature of 80 °C.
2. The test chamber is sealed with a transparent acrylic impact plate and is 6m/m thick (pneumatic cylinder automatic switch).
3. The test supplementary bottle is observed with a hidden water level, which is easy to clean and not easy to break.
4. Saturated air tank adopts SUS#304 stainless steel high temperature resistant pressure barrel for good insulation effect.
5. The blue frame of the laboratory is equipped with a plane indexing frame, which can be adjusted at any angle of 15 degrees and 30 degrees. The fogging and fogging of the four sides are completely consistent, and the number of test pieces is large.
Operating temperature: According to CNS.JIS.ASTM., it can be set to constant temperature control.
1. Salt spray test: MSS, ACSS
(1). Laboratory: 35 °C ± 2 °C (2). Saturated air tank: 47 °C ± 2 °C
2. Corrosion resistance test : CASS
(1). Laboratory: 50 °C ± 2 °C (2). Saturated air tank: 63 °C ± 2 °C
Air supply system: air pressure is 1kg/cm2 in two-stage adjustment.
1. The first section is roughly adjusted: 2kg/cm2 imported air filter with drainage function.
2. The second paragraph is precision adjustment: 1kg/cm2PT 1/4 pressure gauge (Japanese)
Spray method:
1. The Bennott principle is used to absorb the brine and then atomize. The atomization degree is uniform and there is no obstruction crystallization. The standard of continuous testing can be ensured, which meets the requirements of ASTM, JIS, DIN, CNS and ISO.
2. Nozzle: Made of special glass nozzle, it can adjust the amount of spray and the angle of spray.
3. Spray amount: adjustable from 0.5 to 3.5 ml (80 c m 2 / h (16 hour average).
Heating system: It adopts water-proof heating method and is used according to CNS, JIS, and ASTM specifications. When the temperature reaches, the system automatically turns ON and OFF, so that the temperature is kept at a constant temperature, the temperature is fine, and the power consumption is small.
Control System:
1. Laboratory temperature controller 0-99.9 °C, liquid crystal type double digital display, with P.I.D automatic calculation, control error ±0.3 °C.
2. With air barrel temperature controller 0-99.9 °C, liquid crystal type double digital display, with P.I.D automatic calculation, control error ±0.3 °C.
3. Heating tank fluid expansion safety temperature controller 0-120 °C.
4. Saturated air tank liquid expansion safety temperature controller 0-120 ° C.
5. The digital display time controller is 9.9s-9990hr.
6. The time accumulator is 0-9999.9hr.
7. The first stage pressure is precisely adjusted and contains an air filter.
8. Pressure gauge: 2.5kg/cm2, precision: 0.01kg/cm2.
9. Rocker illuminating button switch, can be continuously deducted more than 20,000 times.
Safety protection device:
1. Automatic water replenishment system, automatic replenishment when the water level is too low.
2. Automatically cut off the power supply unit when the water level is low.
3. Over-temperature automatic power-off device.
4. A safety warning light device is attached.
Interior products:
(A) Shelf 4
(B) Standard measuring cylinder 1
(C) temperature indicator needle 2
(D) Glass filter 1
(E) meter 1
(F) collector 80cm2
(G) Glass nozzle (shall be cleaned regularly) 1
(H) temperature cup 1
(I) Defogging system 1 group
(J) Test drug sodium chloride (NaCl) 500g 2 bottles
(K) Operating instructions 1 set

Company Information

Dear customer : We,Xi’an Yima Opto-electrical Technology Com.,Ltd. is an integrated economic entity of R&D,manufacturing and trading with over 20 years of history. Our business scope covers various fields such as biochemical analysis,environmental protection,industrial testing,bioscience,medical apparatus and instruments,internet technology and some frontier science. Through a long-time development,we own a national resources system of various professional talents,abundant supply for various components & parts and special materials, full producing &processing equipments,strong Technological standardization and a complete quality assurance system. If you need OEM or ODM in manufacturing ,scientific research,market development and or you want to build your own brand in your country,it’s our honor to cooperate with you.In this way,we have developed many products for our customers from the USA, Europe and South Africa and got good feedback on Alibaba. We firmly believe that science and technology is no boundaries. Our mission is to make every effort to contribute to all humanity.   Your earlier friendly enquire from us would be highly appreciated.Thanks in advance!