Introduction:

    xo-6D aseptic homogenizer, also called aseptic homogenizer, is widely used in animal tissues, biological samples and other average processing. Homogenizers are used in food, medicine, cosmetics, clinical, molecular, toxin and bacteria detection. Applicable, aseptic homogenizers are also particularly suitable for the preparation of microbiological test samples. The stainless steel system of the aseptic homogenizer can effectively separate the surface of the body sample and the homogeneous microbiological sample contained therein. The sample is placed in a disposable sterile homogeneous bag and is not in contact with the instrument. The aseptic homogenizer has the features of gentle homogenization, no contamination of the sample, no damage, no heating, no sterilization treatment, and no need to wash the dishes, and satisfies the requirements of rapidity, accurate results, and good repeatability. The aseptic homogenizer is also suitable for the homogenization of tumor tissue, ie a large number of single cells can be obtained, and if necessary, the tissue cells can be softly broken by extending the homogenization time. Equipped with a new UV sterilization technology, safe and convenient.

Technical Parameters:

  Time: 30, 180, 600 seconds or continuous operation

  Slap speed: 6-9 times / second

  Temperature control: room temperature ~ 80 degrees

  Effective capacity: 3-400ML

  Slap box: stainless steel

  Continuous power adjustable: 300W

  Motor speed: 500-1500r.p.m

  Display mode: LCD display

  Aseptic homogeneous bag: 17×30cm

  Net volume: 22.5KG

  Power supply: 220V/50HZ

  Dimensions: 400×350×300mm

  Packing size: 495×465×360mm

Steps for usage:

    1. Put the sample to be processed into a sterile homogeneous bag.

    2. Open the sterile homogenizer door (which can be fully opened) and clamp the sterile bag opening when closing the sterile homogenizer door.

    3, set the use of aseptic homogenizer program (such as slap speed, slap time, etc.), and pat the homogenization work.

    4. After the experiment is completed, open the sterile homogenizer door and remove the sample.

   The use of an aseptic homogenizer can greatly extend its service life and use results if it does the above.