Main Products: Tester , , ,
CS350-CS16X combination 16 channel potentiostat/galvanostat with CV/CM/Stable polarization for electrochemical test
USD $8,350 - $8,900 /Set
Min.Order:1 Set
Quick Details View All >
Lixian Instrument Scientific Co., Ltd.
Business Type: Distributor/WholesalerMain Products: Tester , , ,Product Details
CS350-CS16X combination 16 channel potentiostat/galvanostat with CV/CM/Stable polarization for electrochemical test
Introduction:
CS350-CS16X multi-channel electrochemical workstation is developed from single-channel series. It has the function of “timing measurement”, achieves channel switches via electric relay, and does time-sharing measurements under the control of a timer.
Through CS16X expander (upper one in the right picture), this kit can jointly conduct cyclic measurements of up to 16 specimens (one by one, not simultaneously). It is suitable for auto timing measurements in multi-electrolytic cell system. The user can choose the number of channel according to need.
CS350 is connected to CS16X expander by a connecting cable without using any driver program. CorrTest software can automatically identify the expander. It improves measuring efficiency for multiple specimens.
Technical parameters
Number of Channel: 16 channels (time-sharing measurement) |
|
Control mode: main/slave | Communication: serial |
Channel switching: 16-channel relay | Channel switch time: <50ms |
Channel insulated resistance: >100MΩ | Power supply of CS16X expander: from expansion port of CS350 |
Potential control range: ±10V | Current control range: ±2.0A |
Potential control accuracy: 0.1%×full range±1mV | Current control accuracy: 0.1%×full range |
Potential resolution:10μV(>100Hz), 3μV(<10Hz) | Current resolution: <10pA |
Potential rise time:<1μs(<10mA),<10μs(<2A) | Current range: 200nA~2A, 8 ranges |
RE input impedance:1012Ω||20pF | Maximum current output: 2A |
Compliance voltage: ±21V(expandable to 200V) | Current increment during scan: 1mA @1A/ms |
CV and LSV scan rate: 0.001mV~10000V/s | Potential increment during scan: 0.076mV @1V/ms |
CA and CC pulse width: 0.0001~65000s | DPV and NPV pulse width: 0.0001~1000s |
SWV frequency: 0.001~100KHz | Minimum potential increment in CV: 0.075mV |
AD data acquisition: 16bit@1 MHz,20bit@1 kHz | Potential and current range: automatic |
DA resolution: 16bit, setup time: 1μs | Low-pass filters: covering 8-decade |
Communication Interface: USB2.0 |
|
Dimension(cm) / Weight: | |
EIS
Signal generator | |
Frequency range:10μHz~1MHz | AC signal amplitude:1mV~2500mV |
Frequency accuracy:0.005% | Signal resolution:0.1mV RMS |
DDS Output impedance:50Ω | DC Bias:-10V~+10V |
Sine Wave distortion: <1% | Waveform: Sine wave, triangular wave and square wave |
Scan mode: Logarithmic/linear, increase/decrease |
|
Signal analyzer |
|
Integral time: maximum: 106 cycles or 105s | Measurement delay: 0~105s |
Integral time: minimum: 10ms or the longest time of a cycle |
|
DC offset compensation | |
Potential automatic compensation range: -10V~+10V | Current compensation range: -1A~+1A |
Bandwidth: 8-decade frequency range, automatic and manual setting |
|
CS350/CS16X Software/Techniques
Stable polarization
Open Circuit Potential (OCP)
Potentiostatic (I-T Curve)
Galvanostatic
Potentiodynamic (Tafel)
Galvanodynamic (DGP)
Transient polarization
Multi-Potential Steps
Multi-Current Steps
Potential Stair-Step (VSTEP)
Galvanic Stair-Step (ISTEP)
Chrono Methods
Chronopotentiometry (CP)
Chronoamperometry (CA)
Chronocoulometry (CC)
Cyclic Voltammetry
Linear Sweep Voltammetry (LSV)
Cyclic Voltammetry (CV)
Staircase Voltammetry (SCV)
Differential Pulse Voltammetry (DPV)
Normal Pulse Voltammetry (NPV)
Square wave voltammetry (SWV)
AC voltammetry (ACV)
Differential Normal Pulse Voltammetry (DNPV)
2nd Harmonic A. C. Voltammetry (SHACV)
Stripping Voltammetry
Potentiostatic stripping
Linear stripping
Staircase stripping
Square wave stripping
Corrosion Tests
Cyclic polarization curve (CPP)
Linear polarization curve (LPR)
Electrochemical Noise (EN)
Zero Resistance Ammeter (ZRA)
Hydrogen diffusion (HDT)
Battery test
Battery charge and discharge
Galvanostatic charge and discharge(GCD)
Extensions
Rotating ring-disk Electrode
Data Logger
Waveform generator
Disc machine control
Dear customer:
We ,Xi’an Yima Opto-electrical Technology Com.,Ltd. is an integrated economic entity of R&D,manufacturing and trading with over 20 years of history .
Our business scope covers various fields such as biochemical analysis,environmental protection,industrial testing, bioscience,medical apparatus and instruments,internet technology and some frontier science.
Through a long-time development,we own a national resources system of various professional talents , abundant supply for various components &parts and special materials, full producing &processing equipments , strong Technological standardization and a complete quality assurance system.
If you need OEM or ODM in manufacturing ,scientific research , market development and or you want to build your own brand in your country, it’s our honor to cooperate with you.In this way ,we have developed many products for our customers from the USA, Europe and South Africa and got good feedback on Alibaba.
We firmly believe that science and technology is no boundaries. Our mission is to make every effort to contribute to all humanity. |
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln