SFGP-750D direct- reading photoelectric spectrometer

Brief introduction
  SFGP-750B photoelectric direct reading spectrometer is rapid quantitative analysis of ferrous and non-ferrous metals analysis instrument components . This instrument is widely used in metallurgy, machinery and other industrial sectors, smelting furnace center line analysis and product testing laboratory , is an effective means to control product quality.

Features

1.750mm focal length of the grating design , Pa type - Runge equipment , high vacuum, high resolution, high sensitivity.
 2.the electronic system of international standards cage , highly integrated circuit design , low failure rate .
 3.the excitation light at frequencies between 150 / 600Hz adjustable , analysis of different samples , choose different excitation parameters to achieve optimal analytical results.
 4.the excitation light source solid auxiliary electrode , jamming solve problems and improve the stability of the excitation source , royalty-free adjustment.
 5.the process of excitation sample , excitation station without water cooling , continuous analysis of samples can achieve better data .

6.automatic multi-element trace , you can quickly analyze the relative deviation of each element of the matrix elements .
 7.8 channel negative high -speed computer to automatically adjust the points , thus greatly improving the utilization and analysis of the linear range of the best lines of the passage in the analysis of the use of different materials , reducing the use of the number of channels , and reduce costs.
 8.the optical part of the overall temperature measures to ensure the normal operation of the instrument , thereby reducing demands on the environment .

Technical parameters
  Various metals and their alloys sample analysis Fe, Al, Cu, Ni, Co, Mg, Ti, Zn, Pb, Sn, Ag , etc. : detection matrix ( multiple substrate)
  Analysis (multi-channel ) : 45 channels.
  Analysis Band ( wide range ): 160nm ~ 650nm
  Detection time ( short time ) : Depending on the type of sample , generally less than 30 seconds .
  Optical chamber ( fine thermostat ): 38 ℃ ± 0.2 ℃
  Power supply: single-phase power protection grounding . Voltage : 220VAC, frequency : 50Hz, use of power : 1.8KVA
Environmental conditions : Operating temperature : 10-30 ℃, storage temperature : 0-45 ℃, humidity: ≤85%