Product Details

1. Main use and scope of application

MQT-90/2.3S, 100/3.1S, 120/3.0S, 130/3.2S pneumatic anchor

drilling rig is mainly used for drilling anchors in tunnels, coal roadways

and semi-coal alleys.

Anchor cable holes and separation observation holes, etc., and can

also stir and install resin anchors and anchor cables.

There are three basic types of MQT-90/2.3S, 100/3.1S, 120/3.0S,

130/3.2S pneumatic bolt drills, which are suitable for different sections

of the roadway (see table below). Its main features are: 1The rotary

cutting mechanism adopts the gear type motor, the torque is large, the

operation is stable, the maintenance is simple, and the failure rate is low;

2 The propulsion mechanism increases the cylinder diameter of the FRP

leg cylinder, increases the propulsion force, and the fourth-level

three-folding The structure reduces the height of the whole machine and

improves the adaptability of the roadway of the drilling machine; 3The

operating mechanism of the drilling machine is equipped with double

exhausting roads, and the falling speed is fast, which improves the

efficiency of the drilling operation; 4 The external water supply system is

adopted to avoid damage due to the water seal. Affect the performance

of the whole machine。