Product Details

Indoor CPE 4G LTE WiFi router with 2 Ethernet Port

B260 specification parameter
B260 specification parameter
Motherboard chip	Chip solution
	Memory flash
	Power amplifier chip
Antenna specification	Omnidirectional antenna
rate	2.4Ghz:300Mbps
rate	LTE Cat4:150Mbps(DL MAX)50Mbps(UL MAX)
Physicalinterface	2pcs10/100 LAN AJ45port support DC24V POE power supply;
	1RESET reset button
	1micro USB port (support DC5V 2.5A power supply
	1micro SIM card slot
Indicator light	power /WAN/LAN/WIFI/4G/3 signal intensity lights
power	power supply:2.4POEpower supply(100m)/USBport power supply;
power	Power Adapter:24V0.5A Power Adapter
Power consumption	<12W
Protection level	IP66 level
Mounting method	Pole-mounted installation,Wall mounting,Bracket mounting
Product Size	Dimensions:3538544mm
Using environment	Working temperature:-10℃~55℃
	storage temperature:-40℃~70℃
	Working humidity, no condensation:10%~90%RH noncondensing
	Storage temperature, no condensation:5%-95%RH noncondensing

4G Router B260 (support SMS function)

1. The drop And Recharge Function:

Network disconnection self-test repair function: When the device is off the public network, it will be detected every 2 minutes, and it will automatically reconnect to the registration dial (if the SIM card has no traffic, it will automatically detect the dial without manual restart after the SIM card recharged) )

2. Networking Mode Selection:

2:1 automatic networking mode (in the automatic networking mode, if wifi and 4G exist at the same time, it will automatically set up the wifi network priority. If it detects that the wifi network does not go to the Internet, it will automatically connect to the 4G network)

2:2 3G/4G mode: fixed 3G/4G Internet access

2:3 wifi mode: You can choose the wifi account and enter the password, it will automatically connect to the Internet on the wifi network.

3. SSID can be set to be hidden or enabled, and the SSID name password can be modified.

4.Relay function (INTERNET WIFI) function, this function is when external WIFI Internet access, and directly use external WIFI to access the Internet, then it will not use 4G network. Function introduction:

(1), You can use WIFI, WLAN or USB connect to the computer, then enter the browser: 192.168.100.1,password:Admin,enter

(2), click the WI-FI settings button, as below:

(3), click the internet WI-FI item, as below:

(4), click on the add item,

(5), search for a lot of nearby WIFI signals, find the required WIFI network, choose the WIFI network and add it.

(6), Dot the circle of the option item, and click to connect to the menu, then the relay settings are completed.as below