Product Description                                                                            

Aerial Bundled Cable, ABC Cable, Overhead cable

Voltage:0.6/1kV

Cores:1, 2, 3, 4, 5, 6

Range of Nominal cross section:10 mm2 - 300 mm2

Application:

A new type of aerial cable for power transmitting. It is extensively used in overhead power transmission line.

Standard: NF C 33-209, IEC, BS, SABS, ASTM

Construction

Conductor:Aluminum, Alloy Aluminum, ACSR

Insulation:XLPE, PE

 1 Standard

IEC60502, IEC61089; NF C33-209; GB 12527-9; ASTM B231, ASTM B232, BS215; DIN48201, DIN48204. 

We can also manufacture ABC cable according to customer's special requirements.
2 Application

The cable as a new-type aerial cable is used for transmitting electric power overhead, extensively used in rebuilding of urban and forest region electrified wire netting. It improves the safety and reliance of electrified wire netting. To be used at cotages of 600V phase-to-phase or less and at conductor temperatures not to exceed 75℃ for polyethylene insulated conductors or 90℃ for cross-liked polyethylene(XLPE) insulated conductors.

3 Specification

Concentric strand aluminum wires as phase conductor; AAAC(all aluminum alloy conductors) or ACSR(aluminum conductor steel reinforced) as messenger (Neutral) core;Phase conductor is insulated by XLPE or HDPE or PVC.

It meets or exceeds the following specifications: 
1). Aluminum Wire, 1350-H19 for Electrical Purposes. 
2). Aluminum Conductors, Concentric-Lay-Stranded. 
3). Aluminum Conductor, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR). 
4). Concentric-Lay-Stranded 6201-T81 Conductors. 
5). Compressed Round Stranded Aluminum Conductors Using Single Input Wire. 
It meets or exceeds all applicable requirements of ANSI/ICEA S-76-474

4 Type of XLPE(PE) insulated ABC cable (service drop)

XLPE(PE) insulate cable (service drop)covers mainly three types:

Duplex Service Drop

Triplex Service Drop

Quadplex Service Drop
5 Construction
The basic construction is as follows: 
3 power cores consisting of standard aluminum conductors, insulated with XLPE insulation 
+ One sheath lighting aluminum conductor with XLPE insulation(optional) 
+ One messenger Al-alloy conductor (bare or covered) 
The messenger conductor can be of galvanized steel wire also. 

The purpose of messenger wire is: 
A) It acts as load bearing wire. 
B) It acts as earth or neutral conductor.

Details Show                                                                                        

   Shipping & Packaging                                                                      

  Company Introduction                                                                      

HeBei huatong wires&cables Group Co.,ltd.It was established in 1993, we are JV with Furukawa(Japanese

company) for rubber serious cables and JV with Riken(Japanese company) for elevator cables. Besides these,our submersible oil pump cable and shipboard cable are very influential in domestic, and, the traditional cables are also produced such as PVC powercables, XLPE power cables, ABC cables, wires, control cables, screened cables,communication cables, conductors.We areOEM for many USA, Europen, Australia cable company,70% of our products are exported, most customers are from developed countries. We got ISO,UL,TUV,KEMA,CE and many other certifications.

 Certification                                                                                        

We are one of China top rank cable&wire manufacturer.Our products meet standards of GB, IEC DIN ASTM, JIS, NF, AS/NZS CSA GOST and so on. At thte same time, we have obtained ISO9001,ISO14001,OHSAS18001, UL,CE,KEMA, TUV, Bureau Veritas, Lloyd,IEC,GL,SA,NK,KR certificates.

  FAQ                                                                                                    

(1).When can I get the price?

We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price, please

call us or tell us in your e-mail so that we will regard your inquiry priority.

(2).How can I get a sample to check your quality?

After price confirmation, you can require for samples to check our quality. Sample is free, but the freight

charge should be paid.

(3).How long can I expect to get the sample?

After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7

days. The samples will be sent to you via express and arrive in 3~5 days. You can use your own express

account orprepay us if you do not have an account.

(4).What about the lead time for mass production?

Honestly, it depends on the order quantity and the season you place the order.The best record we keep is

delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months

before the date you would like to get the products at your country.