Product Details

Lower voltage xlpe insulated power cable:

1 Product Standard

This product is manufactured according to GB/T12706.1, equivalent to IEC60502.1. Or BS, DIN, ICEA standard as customer request.

2 Application

The product is suitable for power transmission and distribution lines with rated power frequency voltage up to and including 0.6/1KV.

Operating Performance

1). Rated power frequency voltage Uo/U: 0.6/1KV.2). Max. Permissible continuous operating temperature of conductor: 90℃3). Max. Short-circuit temperature of the conductor shall not exceed: (5S maximum duration) 250℃

4). The ambient temperature under installation should not below 0℃5). The bending radius of a cable should not be less than 15 times of the cable diameter.

6). The test voltage (A.C.): 3.5kV/5min.

7). The flame-retardant properties of cable comply with grade A, B, C of GB/T19666-2005 or IEC60332.

3 Construction:

Conductor: Solid or stranded copper,aluminum

Insulation: Cross-linked polyethylene( XLPE or PVC)

Circuit Identification: The insulation shall be red, black

Filler: Polypropylene lament with lapped binding tape

Inner Sheath: Polyvinyl chloride (Black)

Armor: Galvanized steel wire

Core-covering: Binding tape

Outer Sheath: Polyvinyl chloride (Black)

Package: Wooden Drum Package or Iron-wooden drum

4 Type and Name:

Type	Designation	Applications
YJV	Copper conductor,XLPE insulated,PVC sheathed power cable	For laying indoors,in tunnel or cable trench,unable to bear external mechanical forces.Single core cable is not allowed to laid in magnetic duct.
YJLV	Aluminum conductor,XLPE insulated,PVC sheathed power cable
YJY	Copper conductor, XLPE insulated,PE sheathed power cable
YJLY	Aluminum conductor, XLPE insulated,PE sheathed power cable
YJV22	Copper conductor,XLPE insulated,steel tape armoured,PVC sheathed power cable	For laying indoors,in tunnel in cable trench,or direct in ground,able to bear external mechanical forces.Single core cable is not allowed to laid in magnetic duct.
YJLV22	Aluminum conductor,XLPE insulated,steel tape armoured,PVC sheathed power cable
YJV23	Copper conductor,XLPE insulated,steel tape armoured,PE sheathed power cable
YJLV23	Aluminum conductor,XLPE insulated,steel tape armoured,PE sheathed power cable
YJV32	Copper conductor,XLPE insulated,steel wire armoured,PVC sheathed power cable	For laying indoors,in tunnel cable trench,well or direct in ground,able to bear external mechanical forces and certain pulling force.
YJLV32	Aluminum conductor,XLPE insulated,steel wire armoured,PVC sheathed power cable
YJV33	Copper conductor,XLPE insulated,steel wire armoured,PE sheathed power cable
YJLV33	Aluminum conductor,XLPE insulated,steel wire armoured,PE sheathed power cable

5 Specification:

Type		No. of cores	Nom. Cross-section of conductor (mm2)
Copper conductor	Aluminum conductor	No. of cores	Nom. Cross-section of conductor (mm2)
YJV YJY	-	1	1.5-800
-	YJLV YJLY		2.5-800
YJV22 YJV23	YJLV22 YJLY23		10-800
YJV YJY	-	2	1.5-300
-	YJLV YJLY		2.5-300
YJV22 YJV23	YJLV22 YJLY23		4.0-300
YJV32 YJV33	YJLV32 YJLY33		10-300
YJV YJY	-	3	1.5-400
-	YJLV YJLY		2.5-400
YJV22 YJV23	YJLV22 YJLY23		4.0-400
YJV32 YJV33	YJLV32 YJLY33		10-400
YJV YJY	-	4	1.5-400
-	YJLV YJLY		2.5-400
YJV22 YJV23	YJLV22 YJLY23		4.0-400
YJV32 YJV33	YJLV32 YJLY33		10-400
YJV YJY	-	3+1	1.5-400
-	YJLV YJLY		4.0-400
YJV22 YJV23	YJLV22 YJLY23		4. 0-400
YJV32 YJV33	YJLV32 YJLY33		10-400
YJV YJY	-	5	1.5-400
-	YJLV YJLY		2.5-400
YJV22 YJV23	YJLV22 YJLY23		4.0-400
YJV32 YJV33	YJLV32 YJLY33		10-400
YJV YJY	-	4+1	1.5-400
-	YJLV YJLY		4.0-400
YJV22 YJV23	YJLV22 YJLY23		4. 0-400
YJV32 YJV33	YJLV32 YJLY33		10-400
YJV YJY	-	3+2	1.5-400
-	YJLV YJLY		4.0-400
YJV22 YJV23	YJLV22 YJLY23		4. 0-400
YJV32 YJV33	YJLV32 YJLY33		10-400
The armoured single core cables are used for D.C. system only. As for A.C. system,non-magnetic armour material should be used, or a magnetic isolation should be applied.

Details Show

Packaging & Shipping

Company Information

HeBei huatong wires&cables Group Co.,ltd.It was established in 1993, we are JV with Furukawa(Japanese company) for rubber serious cables and JV with Riken(Japanese company) for elevator cables. Besides these,our submersible oil pump cable and shipboard cable are very influential in domestic, and, the traditional cables are also produced such as PVC powercables, XLPE power cables, ABC cables, wires, control cables, screened cables,communication cables, conductors.We areOEM for many USA, Europen, Australia cable company,70% of our products are exported, most customers are from developed countries. We got ISO,UL,TUV,KEMA,CE and many other certifications.

Certificate

FAQ

(1).When can I get the price?

We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price, please

call us or tell us in your e-mail so that we will regard your inquiry priority.

(2).How can I get a sample to check your quality?

After price confirmation, you can require for samples to check our quality. Sample is free, but the freight

charge should be paid.

(3).How long can I expect to get the sample?

After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7

days. The samples will be sent to you via express and arrive in 3~5 days. You can use your own express

account orprepay us if you do not have an account.

(4).What about the lead time for mass production?

Honestly, it depends on the order quantity and the season you place the order.The best record we keep is

delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months

before the date you would like to get the products at your country.