Product Details

Product Description

OEM service 600/1000V 4 core PVC insulated steel tape armoured power cable with high popularity in market by Chinese manufacture

0.6/1KV PVC Insulated power cable:

1 Applicant:

The products can be produced and provided according to Chinese standard GB/T12706-2002(equivalent to IEC 60505).The factory can also manufacture the products that are based on British Standard(BS) and other standards.In addition,under the requirement of customers we can design and manufacture the products that have special performance.The products are used in fixed laying on transmission and distribution electrical lines of 50 HZ AC rated voltage up to 6 kV.

2 Specific Property for Using

1.The long-time permissible working temperature of cable conductive core is not more than 70℃.
2.During short circuit(max permanent time is not more than 5 seconds),the max temperature of cable conductor is not more than 165℃.
3.The difference level of laying cable is not restricted.When laying the cable,ambient temperature is not lower than 0℃.
4.They have good chemical stability,and properties of acid resistance,alkali resistance,salt resistance,oil resistance,solvent resistance and flame resistance.
5.Light weight,good bending property and easy installation and maintenance

3.1Type and Name:

Type	Name
VV VLV	Copper(aluminum)Conductor,PVC insulated and Sheathed Power Cable
VY VLY	Copper(aluminum)Conductor,PVC insulated,PE Sheathed Power Cable
VV22VLV22	Copper(aluminum)Conductor,PVC insulated,Steel-tape Armoured,PVC Sheathed Power Cable
VV23VLV23	Copper(aluminum)Conductor,PVC insulated,Steel-tape Armoured,PE Sheathed Power Cable
VV32 VLV32	Copper(aluminum)Conductor,PVC insulated,Fine Steel-wire Armoured,PVC Sheathed Power Cable
VV33VLV33	Copper(aluminum)Conductor,PVC insulated,PE Sheathed Power Cable
VV42VLV42	Copper(aluminum)Conductor,PVC insulated,Thick Steel-wire Armoured,PVC Sheathed Power Cable
VV43VLV43	Copper(aluminum)Conductor,PVC insulated,Thick Steel-wire Armoured,PE Sheathed Power Cable

3.2 Nominal thickness of insulation

Nominal Cross
Sectrion (mm2)

Insulated
Thickness(mm)

Voltage(KV)

1 1.5 2.5 4 6 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800 1000

0.6/1

0.8 0.8 0.8 1 1 1 1 1.2 1.2 1.4 1.4 1.6 1.6 1.8 2.0 2.2 2.4 2.6 2.8 2.8 2.8 3.0

3.6/6

3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4

3.3 DC resistance of conductor

Nominal Cross Section (mm2)	at 20℃,DC resistance is not more than (Ω/km)		Nominal Cross Section (mm2)	at 20℃,DC resistance is not more than (Ω/km)		Nominal Cross Section (mm2)	at 20℃,DC resistance is not more than (Ω/km)
Nominal Cross Section (mm2)	Copper Core	Aluminum Core	Nominal Cross Section (mm2)	Copper Core	Aluminum Core	Nominal Cross Section (mm2)	Copper Core	Aluminum Core
1.5	12.1	18.1	35	0.524	0.868	240	0.0754	0.125
2.5	7.41	12.1	50	0.387	0.641	300	0.0601	0.100
4	4.61	7.41	70	0.268	0.443	400	0.0470	0.0778
6	3.08	4.61	95	0.193	0.320	500	0.0366	0.0605
10	1.83	3.08	120	0.153	0.253	630	0.0283	0.0469
16	1.15	1.91	150	0.124	0.206	800	0.0221	0.0369
25	0.727	1.20	185	0.0991	0.164	1000	0.0176	0.0291

3.4 Insulation Resistance

Test item	PVC insulated Cable		XLPE insulated Power Cable
Test item	0.6/1KV	3.6/6KV	XLPE insulated Power Cable
volume resistivity (ρΩ.cm) min.at 20℃ at top rated temperature min.	1013 1010	1014 1011	- 1012
Ki insulation resistivity constant(MΩ.km) min.at 20℃ at top rated temperature min.	36.7 0.037	367 0.37	- 3.67

3.5 insulation resistance

UO/U(KV)	Us(KV)	T(min
0.6/1	3.5	5
3.6/6	12.5	5

Detailed Images

Packaging & Shipping

Company Information

HeBei huatong wires&cables Group Co.,ltd.It was established in 1993, we are JV with Furukawa(Japanese

company) for rubber serious cables and JV with Riken(Japanese company) for elevator cables. Besides these,our submersible oil pump cable and shipboard cable are very influential in domestic, and, the traditional cables are also produced such as PVC powercables, XLPE power cables, ABC cables, wires, control cables, screened cables,communication cables, conductors.We areOEM for many USA, Europen, Australia cable company,70% of our products are exported, most customers are from developed countries. We got ISO,UL,TUV,KEMA,CE and many other certifications.

Certification

We are one of China top rank cable&wire manufacturer.Our products meet standards of GB, IEC DIN ASTM, JIS, NF, AS/NZS CSA GOST and so on. At thte same time, we have obtained ISO9001,ISO14001,OHSAS18001, UL,CE,KEMA, TUV, Bureau Veritas, Lloyd,IEC,GL,SA,NK,KR certificates.

FAQ

(1).When can I get the price?

We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

(2).How can I get a sample to check your quality?

After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

(3).How long can I expect to get the sample?

After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days. You can use your own express account orprepay us if you do not have an account.

(4).What about the lead time for mass production?

Honestly, it depends on the order quantity and the season you place the order.The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.