Best price XLPE insulated Wire RHH, RHW, RHW-2, XHH, XHHW, XHHW-2

TOP TEN CABLE MANUFACTURER IN CHINA

LARGEST CABLE MANUFACTUER IN NORTH CHINA

ANNUAL EXPORT VOLUME EXCEED 200MILLION USD
WITH UL,TUV,KEMA,CE,BV,PSB,SABS,LLOYD'S,GL,NK,KR,ABS PRODUCTS CERTIFICATIONS
WITH TUV TYPE TESTING REPORT
WIDE PRODUCTS RANGE
ISO9001,ISO18001,OHSAS18001 SYSTEM CERTIFICATIONS
CNAS APPROVAL LABROTARY

Best price XLPE insulated Wire RHH, RHW, RHW-2, XHH, XHHW, XHHW-2

APPLICATION:
1. General purpose wiring for lighting and power - residential, commercial, industrial buildings in accordance with National Electrical Code, maximum conductor temperature of 90°C in wet or dry locations, 600 volts, for installation in conduit or other recognized raceways.
2. Suitable for use in low leakage circuits requiring a dielectric constant of 3.5 or less, such as isolated circuits supplying anesthetizing locations per Article 517-160 of the NEC.
3. Suitable for use as low leakage inductive (loop) vehicle detector wire in accordance with state and municipal requirements.

STANDARDS:
1. Listed by UL as Type XHHW-2 per Standard 44 for Rubber-Insulated Wires and Cables.
2. Conforms to ICEA S-95-658/NEMA WC70, utilizing Column B thicknesses.
3. Conforms to Federal Specification J-C-30B.
CONSTRUCTION: Annealed copper conductor, XLP thermosetting chemically crosslinked polyethylene insulation, surface printed.

Specification
XHHW-2 XLP Insulation, 600 Volts

1. SCOPE
1.1 This specification describes single conductor XHHW-2, a general purpose building wire insulated with
crosslinked polyethylene (XLP) intended for lighting and power circuits at 600 volts or less, in residential,
commercial and industrial buildings. The wire may be operated at 90°C maximum continuous conductor temperature
in wet or dry locations and is listed by Underwriters Laboratories for use in accordance with Article 310
of the National Electrical Code.

2. APPLICABLE STANDARDS
2.1 The following standards form a part of this specification to the extent specified herein:
2.1.1 Underwriters Laboratories Standard 44 for Rubber-Insulated Wires and Cables.
2.1.2 ICEA Pub. No. S-95-658, NEMA Pub. No. WC70 for Nonshielded Power Cables Rated 2000 Volts or Less.
2.1.3 Federal Specification J-C-30B.

3. CONDUCTORS
3.1 Conductors shall be Class B stranded annealed uncoated copper per UL Standard 44.

4. SEPARATOR
4.1 A suitable separator over the conductor may be used at the option of the manufacturer.

5. INSULATION
5.1 Each conductor shall be insulated with XLP, a crosslinked polyethylene complying with the physical and electrical requirements of UL Standard 44 for Type XHHW-2.
5.2 The average thickness of insulation, for a given conductor size, shall be as specified in UL Standard 44 for Type XHHW-2. The minimum thickness at any point shall be not less than 90% of the specified average thickness. The insulation shall be applied tightly to the conductor and shall be free-stripping.

6. IDENTIFICATION
6.1 The wire shall be identified by surface marking indicating manufacturer's identification, conductor size and metal, voltage rating, UL Symbol and type designation.

7. TESTS
7.1 Wire shall be tested in accordance with the requirements of UL Standard 44 for Type XHHW-2.

8. LABELS
8.1 The wire shall bear the Underwriters Laboratories label for Type XHHW-2.

HeBei huatong wires&cables Group Co.,ltd.It was established in 1993, we are JV with Furukawa(Japanese company) for rubber serious cables and JV with Riken(Japanese company) for elevator cables. Besides these,our submersible oil pump cable and shipboard cable are very influential in domestic, and, the traditional cables are also produced such as PVC powercables, XLPE power cables, ABC cables, wires, control cables, screened cables,communication cables, conductors.We areOEM for many USA, Europen, Australia cable company,70% of our products are exported, most customers are from developed countries. We got ISO,UL,TUV,KEMA,CE and many other certifications.

We are one of China top rank cable&wire manufacturer.Our products meet standards of GB, IEC DIN ASTM, JIS, NF, AS/NZS CSA GOST and so on. At thte same time, we have obtained ISO9001,ISO14001,OHSAS18001, UL,CE,KEMA, TUV, Bureau Veritas, Lloyd,IEC,GL,SA,NK,KR certificates. 

(1).When can I get the price?

We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

(2).How can I get a sample to check your quality?

After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

(3).How long can I expect to get the sample?

After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days. You can use your own express account orprepay us if you do not have an account.

(4).What about the lead time for mass production?

Honestly, it depends on the order quantity and the season you place the order.The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.