Introduction and Application:

ADSS The fibers are positioned into a loose tube made of high modulus plastics. Filled with a water-blocking filling compound, the tube is stranded around FRP as a non-metallic central strength member into compact and circular cable core. Then covered with thin PE (polyethylene) inner sheath and a layer of aramid yarn, the cable is completed with a PE outer sheath. ADSS cables are ideal for outside plant aerial applications, the lightweight cable and all-dielectric construction allow cost-effective and safe installation in high voltage overhead power lines.

ADSS (All Dielectric Self-Supporting) Cable is suspended from poles or towers in telecommunication and power outside plant application without shutting off the power.

Characteristics:
1.The lifespan is over 30 years
2.Large span with the largest span of over 1000m
3.Reliable performance of moistureproof and waterproof
4.Central strength member FRP gives high tensile strength
5.PE or AT sheath ensures safety of cable in high voltage environment
6.All-dielectric structure and light weight provide easy installation and good electromagnetic resistance.

GYTA single-armored cables feature stranded loose tube filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then, the cable is completed with a PE sheath. It's suitable for installation for long haul communication and LANs, especially suitable for the situation of high requirements of moisture resistance.

Characteristics:
1.Good mechanical and temperature performance
2.High strength loose tube that is hydrolysis resistant
3.Special tube filling compound ensure a critical protection of fiber
4. Crush resistance and flexibility
5.PSP enhancing moisture-proof
6.Two parallel steel wires ensure tensile strength
Small diameter, light weight and easily installation
7. The following measures are taken to ensure the cable watertight
8. Loose tube filling compound, 100% cable core filling
9.enhancing moisture-proof ,Water-blocking material
10. Single Fiber Reinforced Plastic as the central strength memberFiber optic cable cable

GYXTW single-armored cables feature central loose tube wrapped with a layer of PSP longitudinally, excellent crush-resistant performance. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape, to ensure tensile strength. The cable is completed with a single polyethylene (PE) sheath. It's suitable for installation in aerial or duct environment for communication between bureaus, metropolitan network, access network and is especially suitable for the situation where high-density fibers is expected.

Characteristics:
1.Excellent mechanical and temperature performance guaranteed by the accurate excess fiber length.
2.Critical protection to fibers,based on the excellent hydrolysis resistance and strength performance of tube material and special filling compound filled in the tube.
3.Special compact structure to avoid the loose tube shrinkage.
4.Excellent crush resistance and flexibility.
5.PSP enhances the cable crush-resistance, impact-resistanceand moisture-proof.
6.Two parallel steel wires ensure tensile strength.Small diameter, light weight and installation friendliness with long delivery length.
7.Excellent ultraviolet prevention with PE sheath.
8. Small diameter, light weight and installation friendliness

GYTC8S fiber optic cable is an outdoor Steel strand wire self-supporting cable.
The loose tube is made of high modulus plastics (PBT), which are filled with water
resistant gel. The corrugated steel tape is applied which provide for crush resistant. Outer sheath is
made of UV resistance PE jacket. Figure-8 self-supporting structure provides high tensile strength
and enables easy and cost saving aerial installations.

Characteristics:
1. Good mechanical and temperature performance
2. High strength loose tube that is hydrolysis resistant
3. Special tube filling compound ensure a critical protection of fiber
4. Specially designed compact structure is good at preventing loose tubes from shrinking
5. PE sheath protects cable from ultraviolet radiation
6. Light weight design bring low cost and also easy installation

Hunan Shuanglin Communication Technology Co.,Ltd. is one of the biggest manufacturer of fiber optic cable in China.
The company establishes industrial bases in up to 10 provinces of China and in South America, Europe, South Africa, Mid East, Southeast Asia, and marketing technological service branches in over 30 countries and regions around the world, supplying products in over 80 countries and regions.
The company has passed a lot of international management certificates such as UL, ROHS, ISO9001, ISO14001, OHSAS18001 and so on.
Follow up the clients'demands; make greater efforts to create more values for them, maintain long-term strategic cooperation with all larger Telecom Carriers, integrators and clients at home and abroad
More Products you can visit our website: http://sl-fibercable.en.china.cn

1.Competitive price
2.Fast delivery 
3.Longtime warranty
4.Reliable quality
5.Professional product and technical support
6.Prompt answer for any question or inquiry
7.Value-added service: except good products, we can provide good services on logistic and other help you may need.

Our Service:
1.Send us your inquiry ,we will revert back to you within 12 hours.
2.Adopt strict process and raw materials control to guarantee the life span of 30 years.
3.All our products are well tested,we provide you with test report and certification.
4.We sincerely welcome customers home and abroad to visit our  manufacturer.

FAQ:
(Maybe you will have some questions as below)
Q1.About the price?
Re.We usually quote within 12 hours after we confirm the technical data of your products.

Q2.What's the payment method?
Re.We accept L/C,T/T,Western Union,MoneyGram,PayPal etc.

Q3.What are your terms of payment?
Re.30% in advance,and 70% before shipment

Q4.How to ship the items to me?
Re.Courier(DHL,TNT,FEDEX,UPS,EMS),Airfreight,Ocean Ship are available.

Q5.How long is your delivery time?
Re.The general delivery time is 5-7 days after order confirmed,it depends on the order quantity.

Q6.Can you send me a free sample?
Re.Yes,We are willing to send free sample,if you would like to pay the shipping costs.

Q7.Do you accept OEM or ODM?
Re.Yes,we're factory. any your customized requirements we can do our best to help you realize. 

Tel/WeChat/whatsapp:+86 13537806356
Skype : live:96b502e9036fba06
E-mail: abigail (at)