Name: Filament Winding Fiberglass Reinforced Plastic FRP/GRP Pipe
Brand: zlrc
Availability: InStock

Product Details

Product Description

Filament Winding Fiberglass Reinforced Plastic FRP/GRP Pipe

1. FRP pipe Introduction:
Our company ZLRC can produce various standards of FRP quartz sand inclusion winding pipe, maximum size of the diameter is 4000mm, maximum size of the length is 12000mm and various standards of FRP process pipe, maximum size of the diameter is 300mm.the entire winding process under the computer control, so it has characteristics such as beautiful linear appearance, high precision, easy operation and so on. Pipeline operating temperature is -40 ℃ -80 ℃, the special ratio pipes can withstand 110 ℃ high temperature, freezing medium can’t make the pipe to crack.for large flow volume pipeline, the project cost of large diameter quartz sand pipeline less than the cost of steel pipeline with same diameter in 30%, and like as cost of cement pipes, and easy to transport, low construction cost, doesn’t need maintenance, long service life ,it can be used more than 50 years.

Light Weight and High Strength GRP/Fiberglass/composite/FRP Pipe
FRP Process Pipe/High Pressure FRP Pipe Round Tubes
FRP Process Pipe/Industrial composite Fiberglass FRP Pipe
2. Main Features of FRP Pipe：

1. Structure of FRP Process Pipe Description
1) Antifouling, anti-moth, non-rust, keeping water from pollution; It also apply to carry the polluted water, slurry and seawater;
2) The ability of water resistance and corrosion resistance can prolong product service life;
3) The connection of insert makes airproof excellent; project cost can be reduced without building concrete protect layer;
4) Few joint and various of joint methods not only reduce water resistance but also project cost;
5) Good insulation, heat resistance, combustration resistance; No distortion in high temperature of 80-100 degree;
6) With light weight, high strength, the hoisting cost can be decreased, also expedite installation proceeding;
7) Low maintenance expense
2. 1) Corrosion resistance
2) Lightweighta high strength
3) Easy installation
4) Low temperature-perform
3.Connection method of FRP pipe:
Connection way can be adopted screw connection, spigot and socket connection, flange connection, plain end butt connection, sleeve connection, etc.

Characteristic	— Light weight, high strength, and convenient transportation and installation. — Excellent corrosion resistant, it can be used under the condition of seawater environment for long time. — Good low temperature resistant, it can be used under the condition of -45°C-120°C for long time. — Smooth inner surface, its roughness coefficient is 0.0084, good conveying, and no fouling, no secondary pollution, decrease the cost of the running & maintenance. — Fire retardant, it meets IMOA.753(18) Level-3 fire resistance class
Specification	—Diameter:DN25~DN4000 —Pressure:0.25Mpa~2.5Mpa —Temperature:-45°C~120°C —Length of single pipe: DN<250 ,L=6m ;DN≥12m ;the length can also be made according to the requirement of the user
Application	Application field of frp pipe: ●Chemical medium conveying pipe; ●Small hydropower stations on the ground pressure water pipe, power plants circulation water pipe; ●sewerage pipelines; ●Drinking water delivery pipe and distribution water pipe; ●Crude oil pipes and injection water pipe in the oil field; ●Agricultural irrigation pipe; ●FRP equipment (ventilation and air conditioning, chimneys, scrubbers, etc.) and their accessory pipe; ●Various types of process tube (chemical processes, paper-making process, wastewater treatment, ●desalination technology, food and beverage processing, medical technology, etc.);

Products Show

Filament Winding Fiberglass Reinforced Plastic FRP/GRP Pipe

FRP/GRP Pipe Installation:

Filament Winding Fiberglass Reinforced Plastic FRP/GRP Pipe

FRP pipe Fittings

FRP pipes fittings are elbow, tee, cross, flange, Y-connectors, T-connectors, reducers, etc., to facilitate the construction, elbows, tees, crosses and other fittings can be produced on site.

FRP Pipe Structure

FRP quartz sand inclusion winding pipe structure composed of four parts:

Liner
Also known as anti leakage and corrosion layers. Play a key role in impermeable and anti-corrosion for the pipeline. The inner surface layer is composed of 90% resin, 10% of surface mat. According to the level of the pipe diameter and pressure, the thickness of the lining is 1.5-2.5mm.

transition layer

composed of two layers of chopped strand mat and 75 ± 5% of the resin. role is to prevent the capillary
phenomenon.

structural layer
The layer is a filament-wound layer, which is the key strength of the product. the resin content is 30 ± 5%. in
order to increase the stiffness of the pipeline, so join the quartz sand in the layer, the thickness according to case of external force.

protective layer
also known as the outer protective layer. this layer is the outermost layer of the pipe, made of 100% of the resin, and its role is to prevent the pipe buried in the ground from soil erosion in corrosive media. In addition, the layer added plasticizer, anti-aging agent, increase the service life. generally, its thickness is 0.25-0.5mm

Packing & Delivery

Our Company

Our Service

Our Certifications

FAQ

1. Q: Are you trading company or manufacturer ?

A: We are factory.

2. Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

3. Q: How long is your delivery time?
A: Generally it is 10 days if the goods are in stock. or it is 30 days if the goods are not in stock, it is according to quantity.

4. Q: What is the regular shipping port?

A: Tianjin Port.

5. Q:What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance, the balance should be paid before shippment.