Nitrogen Generator
The LN-10L uses membrane separation technology and built-in compressors to generate laboratory grade nitrogen on-site and on demand.
Highlights
1. Built-in full oil-free compressor, no need for an external air supply
2. Highly economical source of nitrogen gas with low lifetime running costs
3. Highly reliable Air compressor with maintenance required only after 20,000 hours of work
4. Membrane separation technology , proven robust and reliable nitrogen gas generation technology
5. Gas is supplied on demand so generator works to your schedule
6. Safe and practical laboratory-grade nitrogen
7. 12 month warranty
Air treatment
Electronic drainer, air filter, air dryer, etc.
Air from integrated compressor in high temperature and contains much moisture. It meets requirements by air treatment system.
Air separation device
1）Fiber membrane ( 2 pcs)
2）N2 buffer tank: store nitrogen and reduce fluctuation of nitrogen.
3）Air valve: control inlet and outlet pipes of separating membrane
4）N2 filter regulator: regulating pressure outlet of Nitrogen.
5） N2 flow meter: control outlet flow of Nitrogen
6） Pressure relief valve: regulate pressure
7） Pressure gauge: display air pressure and nitrogen pressure
8） Manual valve: control and regulate gas flow
9） Reserve blow valve: Purge and separate the residual oxygen in the membrane
Negative protector( negative pressure switch)
When nitrogen density in gas tank reaches a certain degree, pressure invariableness, negative pressure switch activating, and stopping inlet nitrogen in tank. Vice versa.
Specifications
Model | LN-10L |
N2 purity | ≧99.99% |
Outlet flow | 0-10Nm³/24hr(0-10L variable） |
Dew point | <-65℃ |
Outlet pressure | 0-0.8Mpa(Variable） |
Power | 220V/380V±10％, 50HZ/60Hz±5％ |
Oxygen content | ≤0.1% |
Total organic hydrocarbon content | ≤0.01ppm |
Max consumption | 350W |
Noise | <40dB |
Operating environment | Temperature: 10-40℃, humidity: ≤85％, no dust or corrosive gas |
Outlet interface | Φ3or1x 1/8” compression fitting |
