Product Details

Product Description

  Thickness :  SCH10,20,30,40,60,80,100,120,160,STD,XS,XXS or as requirement
Outer Diameter:   18mm --219 mm
   Length:     2m -12m or on the request of clients
   Pipe section: Round
   Standard:   JIS G3444
   Pipe end:plain or bevel
   Packaging details: in bundle,Plastic Caps, Beveled or as the requirments of the customers
   Trade term : FOB, CFR, CIF.
   Payment term:  T/T, L/C

Product Name	STKM11A steel pipe	STKM12A steel pipe	STKM13A steel pipe	STKM13C steel pipe	STKM14B steel pipe
chemical analysis	C:≤0.12;Si:≤0.35;Mn:≤0.60;P:≤0.040; S:≤0.040	C:≤0.20;Si:≤0.35;Mn:≤0.60;P:≤0.040; S:≤0.040	C:≤0.25;Si:≤0.35;Mn:0.30-0.90;P:≤0.040;S:≤0.040	C:≤0.25;Si:≤0.35;Mn:0.30-0.90;P:≤0.040;S:≤0.040	C:≤0.30;Si:≤0.35; Mn:≤0.30-1.00;P:≤0.040; S:≤0.040
Tensile Strength	≥290MPa	≥340MPa	≥370MPa	≥510MPa	≥500MPa
Yield strength	-	≥175MPa	≥215MPa	≥380MPa	≥355MPa
Standard	JIS G3445
Length	As customer's request
Packaging	Standard export packing, packed in woven bags, with two nylon slings, or can be customized as request
Heat Treatment/ Delivery Condition	Cold finished (hard) BK(+C) Tubes do not undergo heat treatment following the final cold forming and, thus, have a rather high resistance to deformation Cold finished (soft) BKW(+LC) The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming (e.g. bending, expanding) Cold finished and stress-relieved annealing BKS(+SR) Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree. Annealed GBK(+A) The last Cold forming process is followed by annealing in a controlled atmosphere. Normalized NBK(+N) The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere.
Delivery Time	Within 35-50 days from receiving deposit
Payment Term	100% L/C at sight or 30% deposit, 70% balance against copy of B/L
Usage/Application	Pipes for automobile and motorcycle
Main Market	Asia, Middle East, Europe, etc.

Packaging & Shipping

1) only in bundles by steel scrips

2) in bundles and in plastic wrap

3) conform to client' s requirements

Our Services

Our Service
1. Special design avaliable according to requirements.
2. All production process are according to ISO 9001-2008 strictly
3. Free sample
4. Acceptable for any third party inspection (SGS, BV...)
5. OEM is ok.
6. Test product quality through whole process, have our own labrury, control quality well
7. Rich experience of export and sales
8. Good reputation
9. Visit factory any time.