Spherical Roller Bearing, buy 248/800 CA 239/800 CA 239/800 MB 249/800 CA 230/800 MB 230/800 CA 240/800 CA 231/800 CA 241/800 CA Spherical Roller Bearings on China Suppliers Mobile

Product Details

	Principal dimensions			Basic load ratings		Speed limits		Weight	Radius	Calculation factors
Part number	Bore	Outer	Width	Dynamic	Static	Grease	Oil	Weight	Radius	Calculation factors
	d	D	B	C	Co	rpm		Kg	rs _min	e	Y1	Y2	Yo
	mm			kN		1 min−1		Kg	mm	mm
248/800 CA	800	980	180	4150	13000	170	220	330	5,0	0,15	4,50	6,70	4,50
239/800 CA	800	1060	195	6350	14200	190	270	480	6,0	0,16	4,20	6,30	4,00
239/800 MB	800	1060	195	6131	15016	280	360	478	6,0	0,17	3,97	5,91	4,00
249/800 CA	800	1060	258	7800	19500	175	240	648	6,0	0,21	3,20	4,80	3,20
230/800 MB	800	1150	28	9389	21295	260	340	895	7,5	0,21	3,21	4,79	3,20
230/800 CA	800	1150	258	8090	19100	170	220	894	7,5	0,20	3,40	5,00	3,20
240/800 CA	800	1150	345	10300	24600	170	220	1092	7,5	0,27	2,50	3,70	2,50
231/800 CA	800	1280	375	14500	31000	150	190	1960	9,5	0,28	2,40	3,60	2,50
241/800 CA	800	1280	475	16300	37100	130	170	2350	9,5	0,35	1,90	2,90	1,80

Spherical roller bearings are designed to sustain heavy loads, shaft misalignment and deﬂection. They contain two symmetrical or asymmetrical rows of barrel-shaped rollers, which align themselves in the outer race sphered track. They are, therefore, able to carry very heavy radial loads and axial loads in either direction.

Roller guidance is achieved by the ﬁxed ﬂanges on the inner ring for the CA, EX, MB, VS and MA - design or a ﬂoating ring for the C design. For further information, see roller guidance design on next page.

Misalignment

The table below gives ﬁgures for permitted misalignment in the different bearing series. Dimensions in accordance with ISO 15:2011

Bearing series	Angular misalignment degrees
213	1°
222	1.5°
223	2°
230	1.5°
231	1.5°
232	2.5°
239	1.5°
240	2°
241	2.5°

EX : 1 piece brass cage, roller guided between 2 inner ring ﬂanges. Cage is guided on the rollers. Assymetrical roller position.

C : 2 pressed sheet steel cages, roller guided on a ﬂoating rings.

CA : 1 piece brass cage, roller guided between 2 inner ring ﬂanges. Cage is guided on the rollers. Assymetrical roller position.

MB : 2 piece brass cage, roller guided between 2 inner ring ﬂanges and one central rib. Cage is guided on the inner ring.

VS C4 F80 : 1 piece brass cage, roller guided between 2 inner ring ﬂanges. Cage is guided on the outer ring.

MA C4 F80 : 2 piece brass cage, roller guided between 2 inner ring ﬂanges and one central rib. Cage is guided on the outer ring.

C 2RS : Steel cage with 2 NBR seals

EX meet the higher exigency of the market. EX bearings are produced with higher grade steel, enhanced heat treatment process, higher machining accuracy and better surface roughness. These improvements are resulting in bearings that run with less noise and less vibrations and have a improved energy efﬁciency.

C 2RS type is a sealed spherical roller bearing with a steel cage C and 2 NBR seals. High temperature seals 2VS are available as well. Sealed bearings are ﬁlled with lithium based grease. Due to the seal, misaligment is reduced. As well for some types the bearing with differs from the standard width.

Spherical roller bearings are manufactured with tapered bore-K(1:12) and K30 (1:30) with lubrication groove and 3 lubrication holes on the outside diameter W33. All our sphericals have the W33 feature.

Tolerances

Spherical roller bearings with cylindrical and tapered bore are generally manufactured to “PO” precision class. Radial Clearance

Spherical roller bearings with cylindrical and tapered bore are generally manufactured to normal (CN), C2, C3, C4 and C5 clearances. Heat Treatment

Spherical roller bearings with outside diameter D>240mm of all series given in this catalog can be used to an operating temperature of +150°C (+302°F). Small size bearings operate normally at temperatures up to +120°C (+248°F).

Contact with us via email sale01@hady.Ltd directly for detail requirement.