Commodity | Corten Steel Plate | ||||||||||||||
Material/Standard/Grade | |||||||||||||||
Standard | Material | ||||||||||||||
EN10155 | S235J0W, S235J2W , S355J0WP , S355J2WP , S355J0W , | ||||||||||||||
ASTM | Corten A , Corten B , A242 Type1 , A588 Gr.A/B/C , A606 Type4 | ||||||||||||||
JIS G3114 | SMA 50W , SMA50CP | ||||||||||||||
Chemical and Mechanical | |||||||||||||||
| %C | %Si | %Mn | %P | %S | %Cr | %Cu | %V | %Ni | Yield | Tensile | Elongation | |||
Corten A | 0.12 | 0.25-0.75 | 0.2-0.5 | 0.07-0.15 | 0.03 | 0.5-1.25 | 0.25-0.55 |
| 0.65 | 355MPA | 470-630MPA | 20% | |||
Corten B | 0.16 | 0.3-0.5 | 0.8-1.25 | 0.03 | 0.03 | 0.4-0.65 | 0.25-0.4 | 0.02-0.1 | 0.4 | 355MPA | 470-630MPA | 20% | |||
ASTM A588 | 0.19 | 0.3-.065 | 0.8-1.25 | 0.05 | 0.04 | 0.4-0.65 | 0.25-0.4 |
| 0.4 | 340MPA | 480MPA |
| |||
ASTM A242 Type 1 | 0.12 | 0.75 | 1 | 0.06-0.15 | 0.03 | 0.3-1.25 | 0.25-0.55 | 0.52 | 0.4 | 355MPA | 510-680 | IMPACT-20/27J | |||
S355JOWP | 0.12 | 0.75 | 1 | 0.06-0.15 | 0.035 | 0.3-1.25 | 0.25-0.55 | N.009 | 0.4 | 355MPA | 510-680 | IMPACT0/27J | |||
| |||||||||||||||
Thickness | 0.5-200MM (Usually) | ||||||||||||||
Width | 600-4200MM (Usually is bellow 2200MM) | ||||||||||||||
Length | 3000-18000MM (20ft container suit Max5800MM ; 40ft container 11800MM) | ||||||||||||||
Finished | Cutting, Painting, Ball blast, Pretreatment ,Q+N, Bending, Uncoiling | ||||||||||||||
Supply capacity | 5000MT/Month | ||||||||||||||
Payment term | 30%TT Deposit , 70%TT or LC | ||||||||||||||
Package | Standard seaworthy package | ||||||||||||||
,