Product Details

Product Description

Hot Rolled Steel Plate (S235J2 S235JR S355J2 S355JR )

Standard: AISI ASTM SUS JIS EN DIN,
Steel Plate (Hot rolled ) S235JR ,A235J0 , S235J2 , S275Jr , S275J0 , S275J2 ,S355JR ,S355J2 , S355J0 ; S355K2 , S355N , S355NL
EN 1.0038 , 1.0114 , 1.0117 , 1.0044 , 1.0143 , 1.0145 , 1.0045 , 1.0553 , 1.0577 , 1.0596 , 1.0590 ;
GB: Q235B ,Q195 ,Q215 ,Q345B
DIN: ST12 ST13 ,ST14 ST,15 ,St-38 , DC 01 ,DC02 ,DC03 ,DC04
JIS: SS400 ,SPCC ,SPCD ,SPCE

Grade :	S355JR
Standard:	EN 10025 - 2 : 2004 Technical delivery conditions for non-alloy structural steels
Classification:	Non-alloy structural steels

S355 structural steel plate is a high-strength low-alloy European standard structural
steel covering four of the six "Parts" within the EN 10025 - 2004 standard.
With minimum yield of 50,000 KSI, it meets requirements in chemistry and physical properties similar to ASTM A572 / 709. Careful attention should always be placed on the specific variation of S355 required if considering substitute material.
1. Chemical composition % of the ladle analysis of grade S355JR

Nominal thickness =< 30(mm) CEV max = 0.45
C	Si	Mn	P	S	N	Cu	CEV
max 0.24	max 0.55	max 1.6	max 0.04	max 0.04	max 0.012	max 0.55	max 0.47

2. Mechanical properties of grade S355JR

Nominal thickness (mm)	to 16	16 - 40	40 - 63	63 - 80	80 - 100	100 - 125
ReH - Minimum yield strength (MPa)	355	345	335	325	315	295

Nominal thickness (mm)	3 - 100	100 - 125
Rm -Tensile strength (MPa)	470-630	450-600

Nominal thickness (mm)	3 - 40	40 - 63	63 - 100	100 - 125
A - Minimum elongation Lo = 5,65 √ So (%)	22	21	20	18

Temperature	-20	0	20
Notch impact test. Min. absorbed energy	27	27	27

4. Application : S355 is used in almost every facet of structural fabrication. Typical applications include:

Δ Structural steelworks: bridge components, components for offshore structures

Δ Power plants

Δ Mining and earth-moving equipment

Δ Load-handling equipment

Δ Wind tower components

5. Thickness: 1.0-100.0mm
6. Width: 1000mm, 1219mm, 1500mm, 1800. And length: Could be cut into any size as per customer's request. Usually our common sizes: 1219mm*2438mm (4*8ft), 1219mm*3048mm (4*10ft) and 1000mm*2000mm.
7. Packing: Iron Belt fastened , or customize package.