Strip IC automatic burner 



Main Specifications 
   Power: 110V / 220V 
   Current: 700mA max 
   Ambient temperature: 0-40 ℃ 
   Humidity: 10% -90% non-condensing 
   Pressure: 0.4MPa 


Description: 
        Strip automatic burner KC-003, primarily for the plant, designed to burn IC design company. The solution to the present, most plants use low labor efficiency brought about writers, poor rate of shortcomings, but also according to the plant, the cost of production tool design company requirements. KC-003 can be burned for the corresponding specifications of the strip packaged IC, IC package has mainly applied: SOT23-3 / 5/6 package series; SOP8 and SOP10 / 14/16/20/24/28, etc. SOP package series; replacement programmer different manufacturers, you can burn different manufacturers IC. KC-003 can each feeding a menu button operation, automatic operation. 
  
  
Main features: 
1. Every time you can be burned into an IC to feed bits. 
2. At the end of the burn, according to the writer gives OK, NG signal, the IC burn burn test, no tear tape protective film on the placement machine directly after burning is complete. 
3. For the machine to adjust the parameters of convenience, the appropriate parameters can make the machine run more smoothly and increase productivity. 
4. At the burning NG, you can set the number of re-burn, only to set the number of times it appeared NG judged as NG. Judgment NG IC, requires manual marking processing. 
5. The number of burn IC OK and NG can be recorded. This number can not be lost after power-down, easy production management. 
6. Use the LCD Chinese menu display, has a friendly user interface. 
7. burn for several IC, using a wide range. 
8. The machine with the gas source, easy to use, once burned an IC, the basic need of man, a substantial increase in production efficiency.