301 304 321 316 Stainless Steel Strip 1/4 price
USD $1,300 - $1,343
Min.Order:1
Factory direct supply cold rolled stainless steel strip :
1. Standard: ASTM/JIS/GB
2. Grade:SS 304 Strips, SS 304L Strips, SS 316 Strips,SS 316L Strips,SS 316TiStrips,SS 321 Strips,SS 347 Strips,SS 309 Strips ,SS 310 Strips,SS 310S Strips,SS 409 Strips,SS 409M Strips,SS 410 Strips,SS 410S Strips,SS 420 Strips,SS 430 Strips,SS 440C Strips
3. Width Range: 2 ~ 600mm
4. Thickness Range: 0.03 ~ 3.0mm
5. Surface : 2B,BA,HL,BK,NO.1,NO.4,8k,etc
6. Hardness:1/4H,1/2H,3/4H,H,O
Mechanical Properties | |||||
Grade | State | Hardness HV | Yield Strength | Tensile Strength | Elongation(%) |
SUS304 | ANN | <200 | >205 | >520 | >40 |
1/4H | 200-250 | >255 | >550 | >35 | |
1/2H | 250-310 | >470 | >780 | >6 | |
3/4H | 310-370 | >665 | >930 | >3 | |
H | 370-430 | >880 | >1130 | -- | |
SUS301 | ANN | <250 | >205 | >520 | >40 |
1/4H | 250-310 | >470 | >780 | >35 | |
1/2H | 310-370 | >510 | >930 | >10 | |
3/4H | 370-430 | >745 | >1130 | >5 | |
H | 430-490 | >1030 | >1320 | >3 | |
EH | 490-550 | >1275 | >1570 | -- | |
SH | >550 | >1500 | >1850 | -- | |
SUS201 | ANN | <200 | >205 | >515 | >40 |
1/4H | 200-250 | >250 | >550 | >35 | |
1/2H | 250-310 | >470 | >780 | >6 | |
3/4H | 310-370 | >665 | >930 | >3 | |
H | 370-430 | >880 | >1130 | -- | |
SUS430 | ANN | <200 | >205 | >450 | >22 |
1/2H | 200-250 | >330 | >505 | >10 | |
H | 250-310 | >420 | >750 | >6 | |
SUS443 | ANN | <200 | >305 | >483 | >31 |
SUS310S | ≤200 | <200 | >205 | >520 | >40 |
SUS316L | ≤200 | <200 | >310 | >620 | >40 |
Chemical Composition:
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
201 | .15 Max | 5.5 - 7.5 | 1.00 Max | .060 Max | .030 Max | 16 - 18 | 3.5 -5.5 | .25 Max | |
202 | .15 Max | 5.5 - 7.5 | 1.00 Max | .060 Max | .030 Max | 16 - 18 | 3.5 -5.5 | .25 Max | |
301 | 0.15 max | 2.00 max | 1.00 max | 0.045 max | 0.030 max | 16-18 | 6–8 | 0.10 | |
302 | 0.15 | 2.00 max | 0.75 | 0.05 | 0.03 | 17–19 | - | 8–10 | 0.10 |
302B | 0.15 | 2.00 max | 2.0–3.0 | 0.05 | 0.03 | 17–19 | - | 8–10 | - |
304 | 0.08 | 2.00 max | 0.75 | 0.05 | 0.03 | 18-20 | - | 8-10.5 | 0.10 |
304L | 0.03 | 2.00 max | 0.75 | 0.05 | 0.03 | 18-20 | 6–12 | 0.10 | |
304H | 0.04-0.01 | 2.00 max | 0.75 | 0.05 | 0.03 | 18-20 | 8-10.5 | - | |
310 | 0.25 | 2.00 max | 1.50 | 0.05 | 0.03 | 24-26 | - | 19-22 | - |
310S | 0.08 | 2.00 max | 1.50 | 0.05 | 0.03 | 24-26 | - | 19-22 | - |
316 | 0.08 | 2.00 max | 0.75 | 0.05 | 0.03 | 16-15 | 2–3 | 10–14 | 0.10 |
316L | 0.03 | 2.00 max | 0.75 | 0.05 | 0.03 | 16-18 | 2–3 | 10–14 | 0.10 |
321 | 0.08 | 2.00 max | 0.75 | 0.05 | 0.03 | 17–19 | 9–12 | 0.10 | |
410 | .080 -.150 | 1.00 max | 1.00 Max | 0.04 | 0.030 max | 11.5-13.5 | 0.75max |
The inner size of container is below:
20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) about 24-26CBM,27MTS
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM,27MTS
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM,27MTS