Sakysteel maintains an extensive inventory of stainless steel products, including stainless steel plate, diamond plate, 2B 2D

mirror stainless steel sheet, stainless steel polished sheet, stainless steel flat & expanded sheet, and perforated stainless steel sheet.

Sakysteel Stainless offers over 20 different grades in stainless steel products. With our mill partnerships, we can also source many hard to find or other non-standards sizes. All stainless steel sheet can be cut to size with our full range of processing services, including shear cutting, waterjet cutting or laser cutting capabilities.

Sakysteel Stainless steel Coil Finish

No. 2D - A smooth, non-reflective cold-rolled annealed and pickled or descaled finish.

No. 2B - A smooth, moderately reflective cold-rolled annealed and pickled or descaled finish typically produced by imparting a final light cold-rolled pass using [large diameter] polished rolls.

Bright Annealed [BA] Finish- A smooth, bright, reflective finish typically produced by cold rolling followed by annealing in a protective atmosphere so as to prevent oxidation and scaling during annealing.

No. 3 Finish is characterized by short, coarse, parallel polishing lines, which extend uniformly along the length of the coil.

No.4 Finish is characterized by short, parallel polishing lines, which extend uniformly along the length of the coil. It is obtained by mechanically polishing a No. 3 finish with gradually finer abrasives.

No.7 Finish has a high degree of reflectivity and a mirror-like appearance. A No. 4 finish that has been polished to 320-grit is buffed for up to 10 minutes but existing grit lines are not removed. The remnants of fine polishing lines can generally seen by an observer standing several feet from a panel.

No.8  Finish  It is produced in the same manner as the No. 7 finish except that the buffing is continued for an additional five to ten minutes. In comparison to a No. 7 finish, the grit lines are much less visible, but they can be seen if the finish is examined closely. The resulting finish is mirror-like but not a perfect mirror.

Laser Cutting

Steel, Stainless and Aluminum

Thickness: 26 ga to 0.375"

Tolerance (Stainless): 10 ga to 0.188": +/- 0.015"

Advantages: Whether it’s stainless steel, aluminum, or steel, laser cutting gives the cleanest edge and the tightest tolerances of any cutting method Sakysteel offers.

Plasma Cutting

Thickness: 0.125" to 1.75"
Tolerances: +/- 0.125 Tolerances depending on thickness;

Advantages:Need circles or other patterns cut out of steel, stainless steel, or aluminum? Ability to cut thicker material than laser cutting:1.75” stainless;

Water-Jet-Cutting

Thickness: 0.0359″ to 2″ thick stainless
Tolerances:  ±.030” ,Tolerances  depending on thickness;          Advantages:the ability to cut material without interfering with its inherent structure, as there is no "heat-affected zone." Minimizing the effects of heat allows metals to be cut without harming or changing intrinsic properties.

Pre-sale Service.

 1.Help you to chose the products.

 2.Provide samples for confirmation

 3.Making the products according to

     your requirement..

Sale Service.

1.A variety of certification test
2.Help you to make the method statement and the details of the process.

After -Sales Service.

1. Our Customer service team is on standby at all times,and if you need any help
2.Quality problem,Help you solved

Saky Steel Co.,Ltd is located in Jiangsu Province. The company was founded in 1995. Now the company covers totally 220,000 square meters . The company has a total employee of 150 out of whom 120 are professionals .The company has been continually expanding itself ever since it's founded . Now the company is a ISO9001:2000 certified company and has been continually awarded by the local government .
The company through investment steel smelting and forging factory resume stability, a wide range of available resources.Main produce and process stainless steel bar/rod/shaft/profile,stainless steel pipe/tube, stainless steel coil/sheet/plate/strip, stainless steel wire/wire rod/wire rope.Our company supply products from SAKY,TISCO, LISCO, BAOSTEEL, JISCO and so on.We can customize non-standard special stainless steel products with high quality with short time. Our products used to chemical treatment equipments, chemicals tanks, petrochemical equipment and press plates. It is also used in railway coaches, roof drainage products, storm door frames, food machinery and tableware.