Product Details

1.a36 SS400 Q235B Stock Available 1250mm 1500mm width Steel Checker Plate cut to size

Product Description

a36 SS400 Q235B Stock Available 1250mm 1500mm width Steel Checker Plate
chemical composition and techanical property is as follows:

Standard	Grade	C max	Mn max	Si max	P	S	Yield strength max	Tensile strength	Elongation%
JISG3101	SS400	0.22	-	0.30	0.045	0.030	245	400-500	26
GB700	Q235B	0.14-0.22	0.30-0.65	0.30	0.045	0.030	235	375-460	21-26
ASTM	A36	0.24	-	0.40	0.045	0.030	250	400-52	26
EN10025	S235JR	0.22	1.50	---	0.045	0.045	175Mpa	340-510 Mpa	17

2. a36 SS400 Q235B Stock Available 1250mm 1500mm width Steel Checker Plate

stock sizes are as follows:

stock thickness: 2mm, 2.5mm, 2.75mm, 3.0mm, 3.5mm, 3.75mm, 4.0mm, 4.5mm, 4.75mm, 5.0mm, 5.5mm, 5.75mm, 7.5mm, 7.75mm.

width: 1010mm, 1250mm, 1500mm.

length: coils cut to any size as required

3. a36 SS400 Q235B Stock Available 1250mm 1500mm width Steel Checker Plate
, coils cut to steel plates

structural picture and weight counting method:

4. a36 SS400 Q235B Stock Available 1250mm 1500mm width Steel Checker Plate
processing service

Our Services

Cut large coils into small coils. For steel coils, we can cut one large steel coil into small steel coils for loading at seaport; because for container shipping, each container usually loads weight can not be over 26 tons, but each large coil is usually about 28 tons, so one large coils has to be cut into small coils, and because the forklift usually takes 7-10 tons at seaport, so for easy loading into conatiner, each large steel coil usually is cut into 3 small coils. For bulk vessel shipping, it usually demands coils weight under 18 tons, so most times, also need cut one large coil into 2 small coils.

Open flat coils into steel checkered plate. For final application, need open flat the coils and cut the coils into steel checkered plate, so we open flat the coils and cut the coils to steel checkered plate to the sizes as required. For saving cost for loading by container, load into 20 feet containers, so cut the length under 5800mm, usually as required to cut to length 2440mm and 5800mm, width usually be 1220mm and 1500mm.

after cutting the steel checkered coils into checkered plate, we can do black paints on the surface of the plate to make the checkered plate to be anti-rust.

Open flat coils into steel checkered plate, also can cut to small pieces as required. the steel coils are open flat, cut into steel plate process is as following:

5. a36 SS400 Q235B Stock Available 1250mm 1500mm width Steel Checker Plate ,
Truck transporation to seaport for container loading and bulk cargo vessel. Loading pictures are as follows:

6.Company introduction:

Tianjin Emerson Commercial and Trade Co.,Ltd mainly provides steel plate, steel sheet, steel pipe,seamless steel pipe and tube, round bars and steel section, and doing steel products processing service: steel plate and sheet processing service. The processing works concludes cutting the larger plate into the small sizes customer demand, cut by drawing, cut to special sizes, weld the cut parts by drawing, also make galvanizing processing or surface painting on the final processed parts; steel pipe hollow bar cutting and lathe processing to make the outer diameter and wall thickness to meet customers requirement, also make heat treatment for hollow bars and pipes. Tianjin Emerson Commercial and Trade Co.,Ltd has large stocks for the carbon steel and low alloy steel plates and sheets, especially have the thick plate and heavy plates on stock, also can provide the special material and large size steel plates, boiler and pressure vessel steel plate, marine steel plate, hot rolled steel plate for new production. Tianjin Emerson Commercial and Trade Co.,Ltd also has large stock for hollow bars, thick wall seamless pipes and tubes. Tianjin Emerson Commercial and Trade Co.,Ltd can provide good service for customer, good quality products, fast delivery, and after-sale service, Tianjin Emerson hopes to build good cooperation with everyone interested.

Contact information:

contact person: Sai Zhang

phone: 8622-87259592 fax:8622-87259592

mobile: 86-13512028034