Product Details

Product Description

Ductile Iron Y Type Strainer with Flanged Ends

Beigao strainers are suitable for use in a variety of fluid systems such as air, chemical, gas, oil or water lines ect. for the protection of valves, pumps, compressors and other equipment.

Cover		Cast Iron
Gasket		Graphite steel compound graphite gasket, good performance and long server life.
Body		Cast Iron
Bolt & Nut		Galvanized bolt, pretty and ircorrosion.
Plug		Galvanized plug, pretty and incorrosion.
Screen		SS304 Perforated and Mesh screen are all available.

DN40-DN800 Long-leg Spring Dual Plate Check Valve DN40-DN800 Long-leg Spring Dual Plate Check Valve

Screen

Woven Wire Type

Woven Wire mesh screens are available in both lined and unlined types. Most the Mesh screens require a perforated screen to support a fine wire cloth. This design is very widely used in higher pressure size Y strainer. Unsupported mesh screens are aviable for lower pressures. Service.

Perforated type

Hole sizes range from 0.20" to 1/2" as standard.

Thickness

Standard gauge of screen material ranges from 22 to 11 depending on hole size. Special thicknesses for drilled holes are available. Perforated metal should be no smaller than 1/2 the metal thickness. Perforated screens are easy to clean. Less susceptible to Cloggng than the mesh design.

Screen Options

An extremely important consideration in the selection of strainer is the size of the perforation or mesh used in the making of the screen. And strainers should provide maximum size of solids that can be passed. The following selection guide charts will help in the selection of the appropriate screen. Screen opening should be approximately 2/3 to 1/2 of maximum allowable solids size. Standard perforated 304 stainless steel are spot welded along the seam for maximum strength. Different size perforations and meshes are available in stainless steel to meet specific madia requirements. If the media is not indicated, screens for water will be supplied.

Perforated Sheet Metal Size

Wire Mesh Size

Screen Cleanning

A Y-strainer screen can be cleaned by removing the plug in the bushing, copor bolted cover allowing the straier to drain the loose material inside the screen. If a blow-off valve is connected to the strainer it can be opened to achieve the same result as the above. The Y-strainer screen can also be cleaned by removing the bushing, cap or cover to access the screen element.
Care should be taken in cleaning screens. After removing a screen, it should be soaked in a cleaning solution or cleaned by using a brush. Do not allow trapped meterial the screen to harden, as it will be difficult to remove. A regular cleaning schedule is recommended to avoid screens from becoming clogged.

Ductile Iron Y Type Strainer with Flanged Ends Ductile Iron Y Type Strainer with Flanged Ends Ductile Iron Y Type Strainer with Flanged Ends

Packing & Shipping

Packing: Plastic Bag+Paper Box+Plywood Case

Shipping: By Sea / By Air / By Express

Please click the picture to see more our products !

Wafer Type Butterfly Valve

Lug Type Butterfly Valve

Flanged Type Butterfly Valve

Dual Plate Check Valve

Gate Valve

Y Strainer

Company Information

Beijing Beigao Valve Co., Ltd. specializes the production of valves. Locating in the Yufa industry and development zone in the Daxing District, Beijing City, China. We are an hi-tech valve manufacturer integrating scientific research, manufacturer and trading.
The factory covers more than 20,000 square meters with the registered capital about 10.8 million RMB. Having one group of outstanding managerial talents and veteran technicians, the company has been bringing in the multi-strip overseas high-tech valve production's efficiently. And the annual production quantity amount to more 250,000 pcs.
The main product includes the butterfly valve, thegate valve, the check valve, the Y-strainer. We can produce various valves according standards of GB, JB, ANSI, DIN, API, JIS and so on and also we can provide according to clients' demand and requirement.
At present, we have been exporting to many countries such as Pakistan, Bangladesh, Egypt, Saudi Arabia, India, Mongolia, Malaysia, Australia, the United States...etc.

Sincerely for your service !

Our Teams

Customers and Fairs

Welcome to visit our factory !

Our Workshop

BG valve equipment, advanced production technology, with large vertical lathe, floor lathe, boring machine, such as the size of large hydraulic valve testing equipment more than 100 sets of advanced management, strong technical force, production equipment, detection means complete, sound ISO9001 quality management system to ensure the product from the feed, production, inspection, the quality of the factory.

Quality is the life line !

Work must meet the requirements of each department, and continue to optimize the overall quality, real ensure zero defect products, "BG people" meticulous strict accordance with international standards, whether it is to select products, raw materials, or the factory inspection of products, we have formed a set of strict quality control procedures.

Certification

CE / ISO9001 / ISO14001 / OHSAS18001

FAQ

1. Are you trading company or manufacturer?
We are manufacturer. We can control every production process, and deal with client's any problem at first time.
2. Where your factory located? Can we visit your factory?
We have two factories. One located in Beijing City, China; another located in Cangzhou City, Hebei Province, China.
We always welcome you to visit our company and factories. Please let's know your schedule, we will arrange to pick up you and visit our factory.

3. Can I get sample from your factory?

Of course. Please give us your related requirement. We will arrange sample for you according to your requirement.

4. Can I cast (or print) our brand and mark on the valve body?
Definitely! Please provide us your mark picture and brand. We will cast (or print) on the valve body and do your nameplate as your requirement.
5. Can you manufacturer different standards valves according to customers requirement?
Yes, we can manufacture valves according to GB, JB, DIN, JIS, API, ANSI, BS and so on and also we can manufacture according to customer's demand and requirement.
6. What is your standard packing?
The goods will wrapped with plastic film, then putted in paper box, then plywood case and loaded with pallets. Of course, special packing method can be accepted when needed.
7. How about the warranty?
The warranty time is 12 months. We can repair or change the valve if there have quality problem.

Ductile Iron Y Type Strainer with Flanged Ends Ductile Iron Y Type Strainer with Flanged Ends Ductile Iron Y Type Strainer with Flanged Ends