Product Details

Malleable Iron Two Socket Cross

Malleable Iron Pipe Clamps

Malleable Iron Pipe Clamps Type 119 Two Socket Cross 90° joint, often used between middle rail and uprights on level sites and often paired with type 101 or 104. The through tube (vertical) cannot be joined within the fitting.
Body Material Standard	Malleable Iron, meet standard ASTM A197
Screw	Stainless and Carbon Steel
Tensile Strength	>=350Mpa
Elongation	>=10%
Hardness	HB<=150
Size Available	AA to E (OD size 27-60 MM)
Surface Treatment	Hot Dipped Galvanized, Black, Zinc Plated & Powder Coated
Pipe Clamp Size	Nominal Bore	Outside Diameter
AA21	1/2’’	21.3mm
A27	3/4’’	26.9mm
B34	1’’	33.7mm
C42	1-1/4’’	42.4mm
D48	1-1/2’’	48.3mm
E60	2’’	60.3mm

Malleable Iron Pipe Clamps are easlily identified by a type number of each design eg. 125 followed by a size code eg. D48, the latter part of which corresponds with the approximate outside diameter of the tube to be used (48.3mm=1-1/2" nominal bore in this case)Hence a 90° elbow suitable for an 1-1/2" norminal bore tube in this example would be denoted as a 125-D48.

Malleable Iron Pipe Clamps are used for a versatile, multi-purpose system. The flexibility of the system allows complex structures to be assembled in a quick and efficient manner.