Product Details

RE-1002 Water Rotary Evaporator Electronic Vacuum Distillation Equipment

Product Description

The vacuum distillation rotary evaporator is mainly used for the continuous distillation of a large number of volatile solvents under reduced pressure, especially for the concentration of the extract liquor and the distillation of the receiving liquid at the time of chromatographic separation.

10Liter Rotovap Price is one of the necessary instrument to separate and purify the reaction product used by the chemical industry, the pharmaceutical industry, university, and scientific research laboratories.

Features of Rotary Evaporator
1	Advanced EL gas-tight system keeps a high vacuum degree. Gas-liquid separator, no reflux
2	Double condenser, collection rate over 95%
3	The rotating flask is easy to install and setup
4	Continuous feed is available. (Inlet Valve)
5	Water bath, intelligent PID temp. a controller can be lifted up and down
6	Built-in transmission system, frequency conversion speed regulation, stable and reliable speed
7	An explosion-proof system is optional
8	110 V/60Hz can be customized

Rotary Evaporator

Small Volume Rotary Evaporator

The rotary evaporator is heated by a water bath(oil bath) to form a thin film under the adverse pressure condition, evaporate highly, then condense and recycle the solvent simultaneously. The apparatus is particularly suitable for the heat-sensitivity material’s condensation, crystallization, separation, recovery and so on. And reflux extraction can be avaliable for parts evaporator models. It is one of the necessary instruments in the chemical industry, pharmaceutical industry, universities, and research laboratories and other units etc., while it is also the primary means for producing concentrated extracts and analysis experiments

Large Volume Rotary Evaporator

Features

1. Adopting international advanced EL gas-tight system can keep a high vacuum degree. Gas-liquid separator, no reflux.

2. Host and vice highly effective double condenser, easy to install, proper sealing, collection rate over 95%.

3. The rotating flask is connected by screw nut, easy to install and setup.

4. There is a discharge valve, fast to collect solvent.

5. Continuous feed is available. (Inlet Valve)

Optional equipment

Circulating water vacuum pump: Used to provide a vacuum source

Low temperature cooling liquid circulation pump: For condensation and reducing waste of materials.

Technical Parameters of All Models Rotary Evaporators
Model	RE-2000B	RE-5299	RE-201D	RE-301	RE-501	RE-1002	RE-2002	RE-5002
Evaporating Flask (L)	2L 29#conical ground joint	1/24#(0.25-2L)	2	3	5	10	20	50
Receiving Flask (L)	1L Ball grinding mouth	0.25-1L/24#	1	2	2	5	10	20
Rotating Motor (W)	40	30	40(Stepless speed regulation)			180		250
Rotating Speed(R/min)	Digital Display 0-120	0~120						0~90
Water(Oil) Bath Power(W)	1500	1500	1200	1500		3000	5000	7000/9000
Temperature Control Range	RT~99℃		Intelligent digital/RT-399℃			0-99(250)℃
Temperature Fluctuation(℃)	±1
Evaporation Rate(H2O)	≥1L/h			≥1.5L/h		>3L/h	>5L/h	>9L/h
Condenser	The double backflow integration standard condenser					The double backflow integration standard condenser
Lifting Mode	Motor Automatic Lifting	Automatic Lifting	Water(Oil) Bath Mannal Lifting		Automatic Lifting	Water Bath Lifting or Electric Hoist
LifingHeight(mm)	0~140	0~150		0~120		0~220
Voltage (V/Hz)	220V 50/60							220V 50/60 380V 50/60
Sealing Mode	PTFE, Fluoro Rubber Sealing

Even though the rotary evaporator (or rotovap for short) looks pretty complicated, it's pretty simple. The purpose of the rotovap is to remove low boiling organic chemicals, usually solvents, from a mixture of compounds. The rotary evaporator is the method of choice for solvent removal in the modern organic laboratory. A pure distillation removes the solvents or low boiling compounds. The rotovap is designed to be operated under a vacuum (to lower a compound's boiling point) while heating the sample at the same time. A cold finger is used to condense the vapors to a liquid, which are trapped in a separate flask.

Acillary Equipment

ClickCooling Chiller: used for condensation and reducing waste of materials.

ClickCirculating Water Vacuum Pump: used to provide a vacuum source.

Company Information

Guangzhou Fan Bo Lun Import and Export Trade CO., LTD. is a professional laboratory equipment supplier. We work hard to provide high quality and low-cost laboratory products to our customers in universities, research labs and production facilities. We are a reliable laboratory equipment manufacturer with a history of more than 30 years for China domestic trade, so we can assure the stable good quality and professional service to our valued customers from worldwide.

Main Products List:
Rotary Evaporator, Jacketed Glass Reactor, Single Layer Glass Reactor, Circulating Water Vacuum Pump, Vacuum Drying Oven, Blast Drying Oven, High-pressure Reaction Kettle, Freeze Dryer(Lyophilizer), Low Temperature Reaction Bath (Slot),Low Temperature Cooling Fluid Circulating Pump(Cooling Chiller), Water/Oil Bath, Magnetic Heating Stirrer, Hydrothermal Synthesis Reactor, Heating Mantle, Lift Platform,Ultronic Cleaner, Microwave Reactor,Ultronic Homogenizer,etc.

Certifications

Our Services

1. Pre-service
24 Hours online service for your consult.
Help choose the right model, and a series of service, person, advise.
1) More than 10 years of manufacturer experience in test equipment and with active research and development team.
2) Acceptable customization for all kinds of unique specification products.
3) We value the inquiry sent to us timely, ensure quick and competitive offer.
2. After sale service
1) We deal with your complaints within 24 hours and a solution provides within 3 working days.
2) Training how to install the machine, training how to use the machine. We would offer operation video and English operation manual. We can provide video-con.
3. Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence in us.
5. Good Packaging:
Suitable Packaging: All goods are covered with film and air bubble film before put them into the strong wooden case.

FAQ

1. What's the minimum order quantity?
One set at present.
2. When can the goods be delivered?
2-5 working days after payment for regular models and 5-10 working days for a customized model.
3. Can you accept OEM or ODM?
Yes, we can.
4. How to choose suitable equipment?
Tell us your requirements, our professional sales will introduce you to the most suitable model.