Spherical Roller Bearing, buy 22208 EX 22208 CA 22208 C 21308 EX 21308 C 22308 CA 22308 EX 22308 VS C4 F80 22308 C 22308 MB 22308 C 2RS Spherical Roller Bearing on China Suppliers Mobile

Product Details

	Principal dimensions			Basic load ratings		Speed limits		Weight	Radius	Calculation factors
Part number	Bore	Outer	Width	Dynamic	Static	Grease	Oil	Weight	Radius	Calculation factors
	d	D	B	C	Co	rpm		Kg	rs _min	e	Y1	Y2	Yo
	mm			kN		1 min−1		Kg	mm	mm
22208 EX	40	80	23	84,0	89,6	6800	9350	1,10	0,5	0,29	2,35	3,50	2,30
22208 CA	40	80	23	76,8	84,9	5200	6900	0,54	1,1	0,29	2,32	3,45	2,26
22208 C	40	80	23	88,0	98,0	4800	6300	0,52	1,1	0,33	2,05	3,05	2,10
21308 EX	40	90	23	96,1	94,4	5950	8075	1,50	0,7	0,27	2,51	3,74	2,45
21308 C	40	90	23	99,0	120	4500	6000	0,71	1,5	0,26	2,60	3,87	2,60
22308 CA	40	90	33	115	127	4000	5300	1,03	1,5	0,39	1,75	2,61	1,71
22308 EX	40	90	33	128,1	136	5100	6800	1,50	1,0	0,39	1,75	2,61	1,71
22308 VS C4 F80	40	90	33	125	135	5300	6300	1,05	1,5	0,39	1,80	2,60	1,70
22308 C	40	90	33	140	145	4300	5600	1,10	1,5	0,43	1,57	2,34	1,60
22308 MB	40	90	33	125	135	3800	5000	1,20	1,5	0,43	1,57	2,34	1,60
22308 C 2RS	40	90	33	115	127	5300	6300	1,07	1,5	0,38	1,80	2,70	1,80

Spherical roller bearings are designed to sustain heavy loads, shaft misalignment and deﬂection. They contain two symmetrical or asymmetrical rows of barrel-shaped rollers, which align themselves in the outer race sphered track. They are, therefore, able to carry very heavy radial loads and axial loads in either direction.

Roller guidance is achieved by the ﬁxed ﬂanges on the inner ring for the CA, EX, MB, VS and MA - design or a ﬂoating ring for the C design. For further information, see roller guidance design on next page.

Misalignment

The table below gives ﬁgures for permitted misalignment in the different bearing series. Dimensions in accordance with ISO 15:2011

Bearing series	Angular misalignment degrees
213	1°
222	1.5°
223	2°
230	1.5°
231	1.5°
232	2.5°
239	1.5°
240	2°
241	2.5°

EX : 1 piece brass cage, roller guided between 2 inner ring ﬂanges. Cage is guided on the rollers. Assymetrical roller position.

C : 2 pressed sheet steel cages, roller guided on a ﬂoating rings.

CA : 1 piece brass cage, roller guided between 2 inner ring ﬂanges. Cage is guided on the rollers. Assymetrical roller position.

MB : 2 piece brass cage, roller guided between 2 inner ring ﬂanges and one central rib. Cage is guided on the inner ring.

VS C4 F80 : 1 piece brass cage, roller guided between 2 inner ring ﬂanges. Cage is guided on the outer ring.

MA C4 F80 : 2 piece brass cage, roller guided between 2 inner ring ﬂanges and one central rib. Cage is guided on the outer ring.

C 2RS : Steel cage with 2 NBR seals

EX meet the higher exigency of the market. EX bearings are produced with higher grade steel, enhanced heat treatment process, higher machining accuracy and better surface roughness. These improvements are resulting in bearings that run with less noise and less vibrations and have a improved energy efﬁciency.

C 2RS type is a sealed spherical roller bearing with a steel cage C and 2 NBR seals. High temperature seals 2VS are available as well. Sealed bearings are ﬁlled with lithium based grease. Due to the seal, misaligment is reduced. As well for some types the bearing with differs from the standard width.

Spherical roller bearings are manufactured with tapered bore-K(1:12) and K30 (1:30) with lubrication groove and 3 lubrication holes on the outside diameter W33. All our sphericals have the W33 feature.

Tolerances

Spherical roller bearings with cylindrical and tapered bore are generally manufactured to “PO” precision class. Radial Clearance

Spherical roller bearings with cylindrical and tapered bore are generally manufactured to normal (CN), C2, C3, C4 and C5 clearances. Heat Treatment

Spherical roller bearings with outside diameter D>240mm of all series given in this catalog can be used to an operating temperature of +150°C (+302°F). Small size bearings operate normally at temperatures up to +120°C (+248°F).