Name: High quality KCB300 gear pump for food oil / Industrial oil
Brand: Jinhai Pump
Availability: InStock

Product Details

Product Description

KCB series gear pump are mainly composed of gears, axles, pump cover, safety valve and axle-end seals etc. The heat-treatment gears have the advantage of higher hardness and intensity, and rotate with the axles inside the replaceable bearing sleeves. All of pumps’s parts can be lubricated by delivered medium when working.
The pump is properly designed with leakage and return chute, which lets the gears bear the least torque force and reduces load and wear on bearings in order to raise pumps’ efficiency.
It is also designed with safety valve for protection against overload. The full return flow pressure of the safety valve is higher than the rated exhaust pressure of the pump. It can be also adjusted within the allowance of exhaust pressure range according to circumstances. But please note the safety valve can't be applied as pressure reducing valve for long time. You may install pressure reducing valve separately on pipe-line if needed.
The direction of rotation is clockwise viewed from coupling end.

product pictures

As figure, the pumps are mainly composed of internal rotor, outside rotor, shaft, pump casing, front cover, seal, bearing etc.
The pump' seal adopts packing seal or mechanical seal. When the delivered medium is high temperature, high viscosity or strong corrosion, packing seal should be adopted.
When the delivered medium is easy crystal linic, we can design the heat preservation jacket in pump casing and front cover in order to melt the medium with steam when working. The pump can be also fitted with the safety valve.
The pump set is composed of the pump, motor and baseplate. The driving way is belt wheel driving or coupling driving.

Detailed Images

Machine Parts

Name: pump body
Brand:Jinhai pump
advantage:
It is made of cast iron with high hardness,great toughness, excellentabrasion performanc and stable performance.

Machine Parts

Name: Driving Gear and Passive Gear

Brand:Jinhai pump

advantage:

The gear after high temperature quenching, ion carburizing lime chloride. Gear has a stronger hardness, wear resistance, high temperature resistance, etc..It Can extend the service life of the gear.

Machine Parts

Name: High Temperature Bearing
Brand :Jinhai pump
advantage:
High temperature bearings can bear larger load torque, good stability, high bearing capacity, long life withstand high temperatures.

Machine Parts

Name: 100% Copper Motor
Brand:Jinhai pump
advantage:

Our gear pumps matching 100% copper motor.They can provide stable operation, low calorific value, output power standards and long service life.

Product parameters

Driving gear (outside rotor) with internal tooth drives the internal rotor and turns in same direction in the full closed pump body. The inlet is from the outlet. When it turns, negative pressure formed at the suction port, the liquid inlet and being take to the outlet by rotor, then the liquid is impelled from the discharge port and the gears mesh. The transportation of liquid finished.

Application Scope

KCB series gear pump applies to delivering non-corrosive lubricating-oil or equivalent liquid without solid particles and fibres at temperature below 80℃ and with the viscosity of 5-1500cSt.Reducing the speed, the pump can delivery the liquid that the viscosity can be up to 500000cSt.

1. It can give performance as transfer pump or booster in oil deliver system.
2. It can be also applied as fuel pump for delivery system, pressurization and injection in fuel supply system.
3. In all industry fields it can be as lubricating pump.

Packing & Delivery

Packaging
Size	Depending on the size of the goods
Weight	Depending on the weight of the goods
Packaging Details	Plywood case or export standard carton.If container is too tigher,we will use pe film for packing or pack it according to your special request.

Delivery
Type of shipping	Usually the ship is shipped, and it can also be determined according to the customer's request

Delivery Time	within a week after receive deposit (according to QTY).We have a professional transport corridor

Certifications

KCB series Stainless steel oil gear pump

KCB series cast iron oil gear pump

KCB series Stainless steeloil gear pump

Our Company

Botou Jinhai Pump Manufacture Co., Ltd is a leading and professional company with many years' experience in pump manufacturing. We specialize in products for many kinds of liquids (such as water, gasoline, lubricant, diesel, acid liquid etc.) Such as Oil Pump, Gear Oil Pump, Lubricant Pump,Stainless Steel Gear Oil Pump, Bitumen Pump, Self Priming Pump, Hot-transfer Oil Pump, Centrifugal Pump etc. Our company can also produce qualified products according to customer's customization.

We are supported by experienced technical team, machining workers and strict inspection to offer various products with competitive price and reliable quality. Our products have a good market in countries and regions of USA, India, Middle East, Europe, Africa etc. The advanced craft, the strong technology, completed examination, and ceaseless innovation provide a speedy development for Jinhai.

Botou Jinhai Pump Manufacture Co., Ltd.
Add: Beijing road tianxin building, cangzhou city,
hebei province, China.
Tel: +86(0317)8392588
Mb: +86-18231037121
WhatsApp: +86 18231037121
http://www.btjhpump.en.china.cn/