Product Details

Product Description

China 10 years factory produced submersible water fountain pump

1.Description:

2.Features of fountain pumps:

1) high reliability
2) environmental protection

3) high efficiency and energy saving
4) Be able to bear its start frequently
5) high resistance to water
6) corrosion resistance and no blockage

The capability of electric machine : using high quality material DR470, increasing the dense of coil to make the fountain to be able to bear its start frequently.

Waterpower part : adopting the perfect waterpower model design to make the runoff , lift and efficiency of the pump more reasonably.

The character of organization : adopting self-cycle and filling – water to cool the electric maching ,JHS fountain appropriative cable ,impeller adopting anti-loosen equipment ,filler using stainless steel material imported painting to paing the inner of maching ,enhancing the anti-loosen eqqiupment , filter using stainless steel material imported painting to paint the inner of machine , enhancing the anti-causticity of subaqueouse electric machine , all of these approvement make the pump more fitfully to the fountain project .

3.Technical parameters:

Model	QSPF10-10-0.55	QSPF15-10-0.75	QSPF25-9-1.1	QSPF40-6-1.1
Discharge	10m³/h	15m³/h	25m³/h	40m³/h
Lift	10m	10m	9m	6m
Rated power	0.55kw	0.75kw	1.1kw	1.1kw
Voltage	380V	380V	380V	380V
Rated current	2.2A	2.6A	3.2A	3.2A
Maximum outside diameter	168mm	168mm	168mm	168mm
Height of pump	420mm	440mm	460mm	460mm

Stainless steel fountain pump:

4.Caution: Do not operate for long time when there is no water in the pump.

5.Water fountain pump installation instructions

1). Environment temperature less than 45°C, and should be away from magnetic objects.
2). Intake with installed pump body parallel to the horizontal plane for optimum results;
3). The silicone tube of inlet connection bend angle is not < 90°;
4). Water pump installation at any angle of 360°, but you need to contact our technical department, so that it can easy to adjust the pump parameters when production.
5). Pump intake should below the horizontal plane when working.
6). Excluding air in the pump before outlet connect hose.
7). Polarity can not be connected reverse.
8). Durable dry draw time;<=0.3 hour;
9). Diving; There are two "u" shaped mounting hole of the pump at the bottom for fixing by screws.

Packaging & Shipping

Actual use of our fountain pumps

Our Services

6.Certification:

Payment and Shipping