Product Details

Application:
WVTR-398B is based on the humidity sensor detection method and available for the water vapor permeability test of heat exchange membranes, nonwoven fabrics and flexible barrier materials.

Features:

Moisture Permeability Tester For Packaging Containers Water Vapor Permeability Tester

features	Weighing method
	Dual weighing modules, patent technology
	18 specimens, continuously test
	One-button test, test automatically in whole process
	Multiple test modes optional
	Temperature and humidity auto control
	Data curves display
	Computer control
	Environment temperature and humidity sensor inside
	Unit based on embedded system,24bit Δ-Σ AD
	Traceable reference film calibration
	Supports DSM system (DSM, lab data management system)

Principles：
The specimen is clamped between the upper and lower chamber, the upper chamber is high humidity side, and the other side of specimen, lower chamber is purged by a stream of dry gas, due to the effect of water concentration gradient at two sides of the specimen, water molecules will permeate through the specimen into the dry gas side, penetrated water molecules will be carried to the relative humidity sensor which generates the proportional signal, so water vapor transmission rate will be obtained by calculating the sensor signal.

Moisture Permeability Tester For Packaging Containers Water Vapor Permeability Tester

Technical indexes:

Test range	5 - 6500 g/m2·24h (Standard)
Resolution	0.001 g/m2·24h
Specimen amount	1 specimen
Temperature range	5C–95C
Temperature accuracy	±0.1C
Humidity range	100%RH (Standard)
Humidity accuracy	±1%RH
Test area	38 cm2 (Standard)
Specimen size	>=150mm * 94mm
Thickness	less 3mm
Carrier gas	Dry Air, or 99.999% Nitrogen
Carrier flow	0~200 ml/min
Gas interface	1/8inch
Power supply	AC 220V 50Hz
Dimension	330mm(L) * 600mm(D) * 330mm(W)
Net weight	30kg

Moisture Permeability Tester For Packaging Containers Water Vapor Permeability TesterCertificates:

Products Catalog

what we can provide

Packing

Export Areas

Contact