Drying machine Features:
1.The water content rate of the discharged sludge can be less than 10%. And the maximum sludge volume reduction can be more than 85%.
2.High thermal efficiency. Less than 1 ton steam consumption for 1 ton wet sludge.
3.It occupies a small area. Equipment for treating capacity of 100ton/day wet sludge occupies less than 500m2.
4.Drying under low temperture make sure the small volatile quantity of organics.
5.Thorough and mature tail gas treatment technology.
6.Standardized design and easy to install in site. Made of stainless steel ensures the service life more than 15 years.

Drying machine selection of models:

Type of sludge: Municipal sludge Dewatering machine used: belt press Wet sludge capacity: 68t/d Moisture rate before drying: 75% Moisture rate after drying: <15%
Type of sludge: Paper & pulp sludge Dewatering machine used: centrifuge press Wet sludge capacity: 35t/d Moisture rate before drying: 80% Moisture rate after drying: <10%	Type of sludge: PTA sludge Dewatering machine used: belt press Wet sludge capacity: 35t/d Moisture rate before drying: 80% Moisture rate after drying: <10%