MDP1 automatic grind coffee powder pouch premade zipper bag horizontal mini doypack packaging machine
BAG LOADING
The process starts with up to 300 empty pouches
being placed into the adjustable cartridge. Bags
can be loaded while the machine is in operation
BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening.
Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the
operator and re-used if good.
BAG OPENINHG
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are
rotated to the fill area and opened.
TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the
chute enters the bag and opens its gate. Product is dispensed immediately, without spillage and protecting the seal from
contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
FILLING
During filling, pouches are held in place with our “posi-hold” gripper system. This allows for heavy weights and shock loads
without disturbing bag Position
SEALING
Digitally controlled ribbed or flat constant heat seal bars give a integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
MECHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and pneumatics. Indicator
lights signal all cycle processes for easy monitoring.
Application
Doypack machine is suitable for all kinds of the premade bags, such as pillow bag, 3-side, 4-side and 8-side quad seal bags (box pouch), kraft bags and spout bags and so on
Function and characteristics
1.Easy to operate,adopt advanced PLC from Japan Mitsubishi, mate with touch screen and electric control system, the man-machine interface is friendly.
2.Automatic checking: no pouch or pouch open error, no fill, no seal. the bag can be used again, avoid wasting packing materials and raw materials.
3.Safty device: Machine stop at abnormal air pressure, heater disconnection alarm
4.The width of the bags could be adjusted by electrical motor.
5.It matches with the glass safety door. The machine will stop working when you open the door. So that it could protect the safety of operators. At the same time, it could prevent dust.
6.The packing materials loss low, what this machine is used the preformed bag, the bag pattern is perfect and has a high quality of the sealing part, this improved the product specification
7.With different feeders changed to pack solid, liquid, thick liquid ,powder and so on
8.The packing bag suits in extensive range, suit for multi-layer compound, monolayer PE , PP and so on Preformed bag made by film and paper.
Technical Features:
Model No. | TOPY-MDP1 | TOPY-MDP2 |
Bag Width | 70-280mm | 70-300mm |
Bag Length | 110-300mm | 110-400mm |
Bag Type | Stand-up bag, pillow bag | Stand-up bag, pillow bag |
Power Supply | 220V, 50HZ | 220V, 50HZ |
Air Consumption | 7.0 CFM@80 PSI | 7.0 CFM@80 PSI |
Pneumatic Parts | PIAB Vacuum Generator, Pneumatics component Airtac from Taiwan | PIAB Vacuum Generator, Pneumatics component Airtac from Taiwan |
if the doypack machine is not suitable for you, we have VFFS packing machines for roll of film, VP Series packing machine
Q1, Do you need the packing machines for premade bags or bags from roll of film?
For roll film we advise VFFS packing machines VP420, VP500, VP620, VP800, VPL1000 and VPL1200. For premade bags we advise doypack machine working on bags with or without ziplock
Q2, What products do you pack, solid, granule, flake, powder or liquid?
For liquid we advise piston or motor pump, for powders we advise auger filler or volumetric cup filler, for solid, flake and granules we advise multihead weigher, linear weigher or volumetric cup filler.
Q3, What are the bag sizes and target weight in each pack?
For VFFS packing machine the minimum film width we work on is 120mm, the maximum film width we work on is 1200mm.
For doypack machine the bag width working on is minimum 70mm and maximum bag width 4550mm.
Q4, Does your company work on OEM?
Yes, we have a professional design and technical team to do the customization
Q5, What’s the delivery time after the order is placed?
We arrange the shipment in 30-35days for standard machine. It takes us more days for customized machines
Q6, How about the warranty?
The warranty is 24 months and we provide lifelong maintenance.
Q7, What can you provide after service?
We provide machine running video, instruction manual in English, spare parts and tools for installation. Also our engineers are available to clients’ factory and technical training.