Product Details:

The pomegranate seed press generally uses a single screw press produced by our company. In fruits and vegetables, such as grapes, sea buckthorn, pomegranate seeds and oranges, the sugar content is high. In Chinese, Chinese medicine residue, pulp residue, and bagasse contain coarse and large fibers. In these plants, a single screw press with forced feed plates should be used. Here, the hydraulic pressure of the forced feed plate is designed and the pressure cavity is pressed. The design needs to be designed according to the different materials. If the design is improper, the drying barrel will be cracked. The advantages of the single screw press, the degree of dryness and wetness can be controlled, the discharge is uniform and convenient, and the output is satisfactory to the user.

The pomegranate wine filter uses a disc diatomaceous earth filter and a plate and frame fine filter for coarse filtration and fine filtration. The filtered pomegranate wine can fully meet the national standards.

Professional pomegranate wine equipment, pomegranate seed press should use our company's single screw press. Let me talk about the reasons for choosing a single screw press.

Because the pomegranate seeds contain a lot of sugar, the tandem screw presses in tandem cause the slippery to be discharged, and the pomegranate seed press that our company specializes in, on the basis of the single helix, adds a forced feed plate, through a Similar to the plum-shaped feed plate and the spiral combination of conveying rotation, the sticky slippery pomegranate seeds are fed into the press layer for extrusion, and a relatively dry press cylinder is formed under the back pressure of the front hydraulic forced door, but the column The dryness of the body reaches the required dryness. When the hydraulic door is opened, the dry material of the continuous press is discharged.

This type of press is not only suitable for the pressing of pomegranate seeds, but also for grapes of the same nature, grapes, apples, lychees, etc. can achieve satisfactory results.

Description:

 1.Screw rotary speed:410r/min

2. Automatic seperate juice and pulp

3.Screen sieve diameter:0.3-2.0mm(Normally is 0.6mm)

4.This machine is composed of front support,feeding entrance,spiral,filter,juice container back support,dregs outlet.The spiral is supported by rolling beating at one end,and by hard wheel beating at the other end.

5.Satiable for after broken fruits and vegetables,such as:tomato,pineapple,apple,orange,blueberry,chilli,spinach,coconut meat, etc.

6.The juicer flew into the juice container at the botton while the dregs are let out through the annular space between the spiral and pressure-adjusting cone,when the gar decrease and the dregs rate will reduce.But when the volume of the gar is too small,granular of dregs will be extrude through the filter with juice.So the magnitude of the gar depends on the demand of client's cleaned on technology.  

parameter: