Product Details

nuts and seeds cashew sunflower seed hazelnut peanut soybean almonds roaster

Brand Name Taizy
Place of Origin Henan, China
Type Cooking Equipment
After-sales Service Provided Engineers available to service machinery overseas

Product Features

cashew sunflower seed hazelnut peanut soybean almonds roaster

Product Description

 

1.Introduction of the almonds roaster machine:

Fully automatic small roasting machine is suitable for all roasted seeds and nuts, health care raw material processing, Chinese herbal medicine raw material processing, seasoning and spice processing, various granular dry fried seeds: coffee beans, chestnuts, peanuts, melon seeds, walnuts, sesame seeds, hazelnuts, Pine nuts, pistachios, cottonseed, rapeseed, soybeans, flaxseed, tea seeds, tung seeds, sunflowers, etc.

 nuts and seeds cashew sunflower seed hazelnut peanut soybean almonds roaster

The automatic small roasting machine has a slanted drum, the drum has an annular passage, and the inner cylinder is heated, and the inner cylinder is provided with a frying plate, and the raw material is continuously added into the inner cylinder, and as the drum rotates, the raw material is stirred by the frying board, one side It is pushed along the drum to the discharge port. The rice-roasting machine is compact, sturdy and durable, with high output, convenient operation and maintenance, and low investment cost.

 

 nuts and seeds cashew sunflower seed hazelnut peanut soybean almonds roaster

 

2.Working Principle of the cashew roaster:

There are two types of automatic small roasting machine woks: ordinary open wok and closed wok. According to the fuel type, it can be divided into wood burning or coal; natural gas, gas or electric heating, customers can purchase according to demand.
When the ignition temperature rises, the motor should be started to rotate the cylinder to avoid partial heating of the cylinder; the cylinder can be preheated to about 50 °C to feed the fried seeds. When the material is fired properly (the time of the fried material depends on the firepower, generally 14- 20 minutes, the temperature rises to about 130 °C) immediately judge whether the discharge can be made, (sampling from the inlet port to judge) If the discharge can be opened, the discharge port baffle can be opened, and the materials will go out one after another; the off-duty will extinguish the fire.

 

nuts and seeds cashew sunflower seed hazelnut peanut soybean almonds roaster

 

3.Parameterof the peanut roaster machine:

ModelSizeCapacityWeightHeating power
TZ-1001550*700*1050mm100kg/h100kg5.5kw
TZ-2001800*850*1200mm200kg/h165kg5.5kw

 

 nuts and seeds cashew sunflower seed hazelnut peanut soybean almonds roaster

nuts and seeds cashew sunflower seed hazelnut peanut soybean almonds roaster

 

4. Feature of the nut roaster machine:

1. The gas-roasted machine is upgraded and improved on the basis of the hand-burning furnace. It is equipped with energy-saving steamed buns, which can adjust the size of the firepower, and the drum is heated more evenly and reasonably.
Second, the electric heating of the rice noodle machine with a temperature controller, you can adjust the temperature inside the drum of the rice noodle machine as needed.
3. The outer layer of the electric heating and roasting machine is equipped with high-quality thermal insulation cotton material, which has good thermal insulation performance and high utilization rate of hot sales. It can ensure the temperature demand of various materials, and the food taste is good, and the heat can be greatly reduced. Effective loss.
4. The heat source selected for the electric heating and roasting machine is an electric heating tube. The energy consumption is much lower than that of other manufacturers, and it is safe and convenient to see the fire.
5. When frying the materials, the fried materials are set up in the drum to stir fry, and the sticking phenomenon does not occur. After the roasting machine has reached the requirements, the machine can be sieved and separated by pressing the switch. No manual assistance is required.

nuts and seeds cashew sunflower seed hazelnut peanut soybean almonds roasternuts and seeds cashew sunflower seed hazelnut peanut soybean almonds roaster

 

5.Maintenance of the roaster machine:

Before starting the machine, add oil to the gear and keep it clean to reduce friction and extend the service life. The bearings should be removed and cleaned every year and then new high-speed butter should be added. If it is not used for a long time, the fire cover should be removed. Remove debris from the inside and outside of the cylinder and the chimney, and apply a layer of oil to prevent rust.

nuts and seeds cashew sunflower seed hazelnut peanut soybean almonds roaster

 nuts and seeds cashew sunflower seed hazelnut peanut soybean almonds roaster

nuts and seeds cashew sunflower seed hazelnut peanut soybean almonds roaster

 

 

 

Our other nuts machine:

https://zztaizy.en.china.cn/

 

1.peanut coating production line:

 nuts and seeds cashew sunflower seed hazelnut peanut soybean almonds roaster

 

 

 

Our friends

nuts and seeds cashew sunflower seed hazelnut peanut soybean almonds roaster 

Company Information

Taizy company is specialized in producing, selling and serving nuts processing production lines.

Our company's main machinery such as: peanuts, walnuts, almonds, cashew nuts and pine nuts production line; macadamia nuts, chestnuts, pistachios, ginkgo, acorns, cocoa beans, castor beans, sesame processing machine; various nuts butter making machines, nuts roasting machines, oil press machines, packaging machines, etc.

Customer satisfaction is our ultimate goal.
Looking forward to establishing cooperation with you.

 

nuts and seeds cashew sunflower seed hazelnut peanut soybean almonds roasternuts and seeds cashew sunflower seed hazelnut peanut soybean almonds roaster 

FAQ

1.  Are you manufacturer?

    Yes, we are. Welcome to visit our factory.
2. Can you change the machine voltage as our request?
    Yes, we can.
3.  How about your after-sales service?
   Our engineer can go outside to install and train your workers to operate the full machine line.
4.  Warranty time of your machine?
    1 year except for consumable spare parts.
5.  How about delivery time of your machine?
    Generally it needs 5-7 days for big machines or producing line,and it will be much longer but within our negotiated delivery time.  

Packaging & Shipping

 

 

You May Like

Find Similar Products By Category

You May Like

View More
Chat Now Contact Now