Coal rods extruder machine/coal stick making machine/charcoal stick forming machine/coal powder briquette extruder machine/ biomass silver coalchar stick bar briqutte making machine

Coal rods extrusion machine is to make rods , the raw material

 can be coal powder, coking coal,

lignite, anthracite coal, iron powder, aluminum powder.

In the

manufacture process,

lime is not needed to be added

So it reduces the cost of the fuel, improves the calorific value of coal,

and has

higher economic benefit.

2This machine adopts the variable pitch impeller, which will put

forward the power coal

strongly in the back of the cylinder body, after barrel volume is

compressed,

the power coal is extruded through the front head

and forms coal rods.

There are many kinds of round hole shape, so there are many kinds of coal rods.

Features of coal briquette extruder:

1. This machine is to make coal and charcoal powder into sticks. This is the first step to make silver

charcoal.

2. The shape of the sticks can be made by customers requirements.

3. The product made by this machine is no pollution and smoke. It is the most suitable machine for you.

4. The machine can do shisha charcoal /sliver charcoal.

5. It is suitable for charcoal powder, wood charcoal powder, coconut shell charcoal powder, rice husk

charcoal powder, charcoal dust, coal powder.

6. For the material, the size should be less than 5 mm adding material, the coal moisture is 12% -14%.

7. The shape and size of stick can be made as requires, like round, hexagon, cinquefoil and others, in

the stick center, it can with hole or not.

8. For the length, it has the auto-cutter.

Working principle of coal briquette extruder:

1. The motor transmits power to transmission through the V-belt.

2. At the same time, the transmission output shaft transmits power to propeller through the

floating coupling.

3. The propeller push coal forward through forming die to produce the high-pressure coal stick.