Standard 5V 12V 15V 24V 36V 48V 50W Switching Power Supply
USD $7.8 - $10.5 /Piece
Min.Order:100 Pieces
Our range of power supplies covers AC/DC, DC/AC,DC/DC with a wide span of voltages and power, from a few watts to many kilowatts. The extensive standard range, comprising a combination of our own designs and products from our leading partners, is complemented by our custom design capabilities, ensuring we can always provide optimized solutions.
Features:
1.Supper slim series 30mm height high reliability
2.Electrolytic capacitors all 105℃
3.Built-in EMI filter
4.Top international brand components for key parts
5.Protections : overload / over voltage / short circuit
6.2 years warranty
Specification:
Model No. | BW50-1AC05 | |
Output | 5V | |
Rated Current | 10A | |
Rated Power | 50W | |
Ripple & Noise(max.) | 80mVp-p | |
Current Range | 0~10A | |
Voltage Toleranc | ±2.0% | |
Line Regulation | ≦±0.5% | |
Load Regulation | ±1.0% | |
Set up ,rise time | 30ms/230VAC 30ms/115VAC | |
Hold up(Typ) | 30ms/230VAC 30ms/115VAC | |
Input | Voltage Range | 100~240VAC |
Frequency Range | 47-63Hz | |
Efficiency(Typ) | 83%/230VAC | |
AC Current(Typ) | 2.3A/115VAC | |
Inrush Current(Typ) | 45A/230VAC | |
Leakage Current | <1mA/240VAC | |
Protection | Overload | 105%~150% hippo mode,auto-recovery |
Over Voltage | 115%~150% shut off, re-power on to recover | |
Environment | Working Temp. | -30~+70℃ |
Working Humidity | 20~95%RH | |
Storage temp. | -40~+80℃ | |
Storage humidity | 10~90%RH | |
cooling | Cooling by free air convection | |
Vibration | 10-500Hz,2G 10 min./cycle,period 60 min. each along X,Y,Z axes | |
Safety & EMC | Safety Standards | UL60950-1,EN60950-1 |
Withstand Voltage | Input-Output:4.0kVAC | |
Isolation Resistance | / | |
EMC Emission | EN55011,EN55022 | |
EMC Immunity | EN61000-4-2,-3,-4,-5,-6, | |
Others | MTBF | 271.9K hrs. MIL-HDBK-217F(25℃) |
Dimension | 99*82*30mm(L*W*H) | |
Packing/Weight | 0.35Kg | |
Note | 1.At maximum output power, nominal input voltage, Ta = 25°C. | |
2.Refer to Output Derating Curve (next page) for details of output derating versus input voltage,ambient temperature and mounting method . | ||
3.Refer to picture A for measure results about line regulation,load regulation and ripple & noise | ||
Ripple & noise are measured at 20MHz by using a twisted pair of load wires terminated with a 0.1uF and 47uF capacitor. | ||