Dongguan Jianyin Machinery Technology Co., Ltd. is mainly engaged in: Swiss GF High Speed Machine, Taiwan Gaoming KAOMING Gantry Machining Center, 650 Machining Center, 850 Machining Center, 1160 Machining Center, 1270 Machining Center, 1580 Machining Center, 1890 Machining Center, Czech FERMAT Wan. Processing equipment, five-axis railway track processing equipment in Mobya, Germany, five-axis aircraft skin processing equipment in Mobya, Germany, car body manufacturing equipment in Mobya, high precision five-axis KOVA, vertical five-axis processing center, horizontal five-axis processing center, bridge five-axis processing center, SCHNEEBERGER NC tool grinder in Switzerland, Rowes NC five-axis processing. Center, Aluminum Profile Five-Axis Machining Center, Profile Five-Axis Machining Machine, Profile Five-Axis Machining Center, Three-Axis Four-Axis Machining Center, Skylight Travel Frame Machining Center, Battery Pallet, Profile Five-Axis Machining Center, One-meter Aluminum Profile Machining Center, Two-meter Aluminum Profile Machining Center, Three-meter Aluminum Profile Machining Center, Four-meter Aluminum Profile Machining Center, Fi Center, 7m Aluminum Profile Processing Center, 8m Aluminum Profile Processing Center, 9m Aluminum Profile Processing Center, 10m Aluminum Profile Processing Center, Moving Beam Profile Processing Center. Large and small five-axis processing centers, high-speed crane-type five-axis processing centers, Osaka horizontal five-axis processing centers, European high-speed five-axis, Taiwan Asia Pacific Elite APEC five-axis processing center, SNK moving beam five-axis, Fidia five-axis processing machine, Japan SNK five-axis gantry large pentahedron processing center, Fanaco slow wire cutting machine, Fanuc Fanaco CNC processing center, Fanuc Fanaco robot, mirror spark machine High precision internal and external grinder, direct grinder, surface grinder, high precision five-axis, Japanese TAKISAWA compound lathe, ultra-precision optical processing equipment, mirror processing equipment, Germany EXERON micro-precision five-axis linkage processing center, EDM, high-speed machine automation production line. Siegmund Sigmund Germany imports permanent magnet cranes, welding workbenches and fixtures.

[0002] In the profile processing equipment, the profile is placed on the worktable and then processed. In order to speed up the processing efficiency or facilitate the simultaneous processing of multi-layer tooling materials, many profiles are usually overlapped on the worktable at the same time, and these profiles are processed by the cutter at the same time (such as simultaneous processing of screw holes). However, because the profile is put up manually, there will inevitably be errors in manual feeding, resulting in uneven multi-layer materials. At this time, it is necessary to tidy up the materials manually (if not tidy up the materials will lead to processing errors). Manual finishing is not only time-consuming and laborious, but also inefficient, and for some large or heavy parts, it needs mechanical equipment to complete. Increased production costs. It is suitable for mass production of various long aluminium profiles and other products, such as TV frame, drilling, tapping, milling, flying surface and so on.

Product Description: It is suitable for the processing of installation holes, flume, lock holes and shape holes of various aluminium profiles, with saw blades, and can be used for angle sawing of profiles. The spindle of this equipment can rotate around the Y direction in the range of ~90 degrees, and can complete the processing of three surfaces with a single clamp, which has a very high working efficiency.

Four axes and four linkages can be realized by using the new 10 Ma four axes numerical control system on the desktop, which has a good user interface.

The spindle adopts 9kw Italian HSD original imported air-cooled tool changer spindle with high quality and efficiency. The aluminium material processed from the factory is a large area of aluminium plate, which can not be directly used in real life. It needs to be cut and processed. At this time, the aluminium material cutting machine is particularly important, but there are many matters needing attention in the operation of the cutting machine, do you know?

1. Operators of aluminium cutting machine need to be familiar with the performance of the equipment, understand the habit of the equipment, and ensure the normal and stable operation of the equipment. Operators in the actual operation process need to follow the correct operation process, in accordance with the normal procedures to avoid accidents.

2. Operators should concentrate on cutting operations and not be distracted at all. Because the cutting of aluminium cutting machine is very sharp, slightly inadvertent will cause unimaginable consequences.

At the same time, operators also need to avoid fatigue, drinking, taking drugs and other circumstances to cut operations, in order to avoid the occurrence of danger.

3. Aluminum cutting machine circuit layout must strictly comply with the requirements of the instructions, comply with the safety specifications on the instructions, and remember not to pull the power line without authorization, so as to avoid the occurrence of circuit breakdowns, short circuits and other line failures.

Before using the cutting machine equipment, we need to do a comprehensive inspection of all aspects of the performance of the machine, to be sure that all functions are intact before they can be put into practical use.

4. Operators need to wear good work clothes before using the machine. The work clothes need to fit well. They should not be too big or too loose, so as to avoid adverse effects on cutting operations. And long hair and jewelry should not be worn. Otherwise, if hair or jewelry falls into the groove of the equipment, it will damage the assembly of the equipment, and seriously threaten the life and safety of the operators.

5. We need the placement of grinding wheels when we use the aluminium cutting machine to cut aluminium sheets. When the grinding wheels are burred, we should replace them in time instead of resting on the grinding wheels. Because excessive grinding wheel will cause the thickness of the grinding wheel to become thinner, making the grinding wheel texture brittle, cutting aluminium may lead to the breakage of the grinding wheel.

There is an 8-Position disc tool change warehouse (umbrella type). The whole tool warehouse is propelled by cylinder to ensure safe operation.

Machining center can automatically clamp and brake, saving time and labor.

The whole machine adopts TBI original screw, 30 silver guides, German Henryan original rack and other high-quality accessories to ensure that the machine achieves very high processing accuracy.

The nose is equipped with a protective cover, which fully protects the safety of the operator.

The cooling spray system can be used to cool the props.

CNC profile machine L4500 is very suitable for drilling, milling and other complex CNC processing of large-scale production of various long profiles.

1. Cast bed with integral base, high rigidity and stability.

2. Taiwan Shengjie Arm-clamped 16 BT30 tool storehouse, center position change tool, fast speed, disassembly and assembly tool, fast tool calibration

3. Taiwanese Weilong spindle 12,000, 15,000 and 20,000 revolutions are optional.

4. The screw guide adopts the high precision P 3 grade ball screw and C 3 grade linear guide.

5. X-axis transmission mode, Taiwan Jingjie gear box, rack, sliding mode Taiwan 45 ball track 6 sliders.

6. Y-axis travel 400 mm, transmission mode using Taiwan Shangyin or Yintai 36-0.008 screw, sliding mode Taiwan 35 ball guide

7. The Z-axis travel is 450mm, but the effective travel is about 250. The screw rod of Taiwan Shangyin or Yintai 32-0.008 guide rail is 30.