Digital Curing Agent Shrinking Percentage Density Meter / Tester / Testing Machine
------Accurate measurement,Simple operation,Stable and Durable
Application: It is suitable for the field of quality management,cost control,new formula
researching,new materials researching, scientific academies, researching key laboratories,quality inspection.etc.
Standards:According to the ASTM D792,ASTM D297,GB/T1033,GB/T2951,JIS K6268,ISO 278,ISO 1183,GB/T11540,GB/T12206,GB/T5518 standards etc. In accordance with Archimedes principle.
Adopt the host imported from Taiwan; Resolution 0.001 g/cm3; Features of simple operation,wide application,fully function; alarm rings when judge density is unqualified; No need to open and close the lid with the unicase aluminum alloy measuring table; The operation is more simple,rapid, hommization;adopt the memoryless dynamic measurement method for liquid mode; Function of measuring density with three mode,get out of the cumbersome operation of re-calibrate when change weight; Function of displaying concentration,density and baume.
Specifications:
Density resolution: 0.001 g/cm3
Maximum weight:300g
Minimum weight: 0.005g/0.01g
Measurement range: 0.001-99.999g/cm3
Features:
(1)No need to open and close the lid; Simple operation;Shorter measuring time;According to the
specification of new materials laboratory.
(2)Show the percentage composition of mixed samples for researching and developing new
materials.
(3)Automatically judge whether density is qualified or not and prompt alarm.
(4)Function of automatic zero tracking,buzzer warning,and overload warning.
(5)Function of solution compensation.either water or liquid can be used as medium.
(6)Function of setting actual water temperature,measuring medium density,and water proof medium density.
(7)Function of setting aerostatic buoyancy and the bound of density.
(8)About the solid mode,adopt the completed high-capacity measurement accessories with the
Transparent injection mould tank,which can resist wear,fall off,and corrosion.
(9)About the liquid mode, density value can be displayed by one procedure.and repeatedly
continuous speediness measurement can be worked.
(10)Density value of samples with the temperature from normal to 100 centigrade can be measured.
Take samples conveniently.50CC would be okay.
(11)It is very easy to clean the measurement cup,can’t get the limitation of the size of pycnometer caliber.
(12)Adopt the completed stainless steel measuring hook.
(13)Coordinate with the operation of thermostatic tank to measure the proportion with the required temperature.
(14)Function of displaying concentration of density and baume.
(15)Adopt the completed special windproof and dustproof cover,which makes the structure convenient and durable.
(16)Volatile liquid,corrosivity liquid,vicidity liquid,strong acid and strong lye liquid can be measured quickly.
(17)Interface of RS-232C is included.the printer of DE-40 will be available to connect PC with instrument.
Product Show:
Measurement Procedure of Solid Model:
Place sample on test board to measure weight in air,and then press ENTER button to memory.
Place sample into water to measure weight,and then press ENTER button to memory.The density value can be displayed.
Measurement Procedure of Liquid Model:
Place beaker with samples on testing board.and take off weight of pothook.
Make standard weigh hanged on pothook and submerged in liquid to be test totally.and then press ENTER button to memory.Density valuve can be displayed.
Measurement Procedure of Hydroscopicity Products:
Place the sample on the test board to measure the weight in the air,and then press
the ENTER button to memory.
Place the sample that did the waterproof treatment into the water to measure the
weight in the water,and then press the ENTER button to memory.show the density value.
Instruction Table
brand | DAHOMETER | ||
model | DA-300T | ||
density resolution | 0.001 g/cm3 | ||
Weight range | 0.005~300g | ||
Density range | 0.001—99.999g/cm3 | ||
Solid
mode | Measuring solid items | Density of all forms of solid,including metal,rubber,plastic,film,floating body,powder,foam,viscous body,structure,tubing,wood,sponge,glass,pitch,cement,soil,gem,paper,concrete,graphite,coal,rock,ceramic.etc.(cover the products of hydroscopicity,non-absorbency,high – viscosity) | |
Measuring mode | Archimedes principle A.general solid measuring method B.porosity materials saturation mode C.porosity materials surface covering method mode. fessional constant volume mode method fessional rubber abrasion loss and expansibility mode method fessional hydroscopicity mode method fessional oil length mode method | ||
Measurable project | density of general non-absorbency solid density of porosity materials oil length of oil bearing porosity of porosity materials DIN volume abrasion loss of rubber powder density water absorption rate | ||
Measuring time | About 5 seconds | ||
Memory method | two procedures | ||
Specific gravity measurement frame | unicase injection forming professional specific gravity mesaturement frame (size:length13.5mm×wide5mm×high11.6mm) | ||
Measurement tank | unicase injection forming transparent professional measurement tank (size:length16.9mm×wide9.8mm×high8.3mm) | ||
Result disply | Disply according to the model:density,specific gravity,apparent density,volume density,wet density,total porosity,effective porosity,oil content,water absorption,wear loss,wear index,expansibility,volume and so on. | ||
Funtion setting | Water temperature setting,density setting of medium of comparative solution,density setting of medium of waterproofing treatment ,boung setting,aerostatic buoyancy setting, Loss value setting of fixed weight of reference glue,loss value setting of weight of reference glue,density setting of reference glue. | ||
Mixed material percentage | Function introduction | automatically read the percentage of the main material in the two kinds of mixed materials | |
setting | freely set the density value of main material and subordinate material | ||
disply | density value,percentage of main material | ||
liquid mode | Measurement type | a:mobility liquid,vicidity liquid,volatile liquid,corrosivity liquid,high temperature liquid,suspension liquid,emulsion and so on.
b:alcohol,scaling powder,essence,blood,sodium chloride,glycerol,electrolyte,diesel,refrigerating,hydrofluoric acid,dichloromethane,vitriol | |
Measurement principle | Archimedes principle displacement method | ||
Measurement mode | 1 group | ||
Measurement time | about 5 seconds | ||
Memory mode | memory in shorter time by one procedure | ||
Result disply | Density and baume | ||
Specific Gravity Measurement frame | stainless steel specific gravity measurement frame | ||
Function setting | Temperature setting,density setting, measurement weights setting of standard sensor ball and weights setting in the water | ||
Measurement testing | distilled testing | ||
Calibration mode | auto correction with one button,auto detection. | ||
Output mode | standard interface of RS-232,output and Print testing data conveniently | ||
Standard accessories | Host,tank,test board,tweezers,thermometer,100G weight,wind and dust cover,a set of measuring floating body parts ,power transformer,DE-20A standard liquid measurement assembly | ||
Optional accessories | DE-40 printer,DE-20B anti corrosive liquid measurement assembly | ||
power | AC~220V / 50HZ | ||
Main feature | data display,accuracy,speediness,convenience Durable,economy | ||
Packing size:42 X 16 X 32cm
Items will be shipped out within 2 days upon verification payment.
Items will be shipped out via:
- air shippment
- International Express: DHL/UPS/FEDEX/TNT .it will take around 5 to 7 days to get your door given considering everything goes well.
As leading manufacturer of densimeter,we guarantee below:
- 100% Competitive price we are the original manufacturer of densimeter for years, the large scale production make our products more competitive, that’s the reason we are very confident to offer the most possible competitive price for the same level testing instruments in the world.
- High quality standards we have the powerful professional researching and technology team to support quality;Our quality has been proved by the good market reaction for years;Our product are built to meet the industrial standards and global standards;Every instrument get checked and approved by our QC before delivery.
- Faultless service we have the professional customer service team to provide the one to one service for you;we can help you to enjoy the one-stop service without any worries;we have the completed after-sales service policy and quality insurance policy;we guarantee instruments for one year and life-long maintenance(Gold Purity Tester for two years)
- Efficient logistics we have the stable partner to help us to deliver the goods to the any corner of the worldwide shortly.Air shipment;International express:DHL/UPS/FEDEX/TNT(5 days to 7 days)
- OEM service We are the original manufacturer of densimeter,that is verified by the third party and Alibaba on site;We can provide you OEM service and print your logo on the instruments.