Product Details

Product Description

Petroleum API , Density , w / gal Tester , Petroleum

Hydrometer , Petroleum Density Meter DA - 300 T

------Accurate measurement,Simple operation,Stable and Durable

Application: It is suitable for the field of quality management,cost control,new formula

researching,new materials researching, scientific academies, researching key laboratories,quality inspection.etc.

Standards:According to the ASTM D792,ASTM D297,GB/T1033,GB/T2951,JIS K6268,ISO 278,ISO 1183,GB/T11540,GB/T12206,GB/T5518 standards etc. In accordance with Archimedes principle.

Adopt the host imported from Taiwan; Resolution 0.001 g/cm3; Features of simple operation,wide application,fully function; alarm rings when judge density is unqualified; No need to open and close the lid with the unicase aluminum alloy measuring table; The operation is more simple,rapid, hommization;adopt the memoryless dynamic measurement method for liquid mode; Function of measuring density with three mode,get out of the cumbersome operation of re-calibrate when change weight; Function of displaying concentration of density and baume.

Specifications:

Density resolution: 0.001 g/cm3

Maximum weigh:300g

Minimum weigh: 0.005g/0.01g

Measurement range: 0.001-99.999g/cm3

Features:

(1)No need to open and close the lid; Simple operation;Shorter measuring time;According to the

specification of new materials laboratory.

(2)Show the percentage composition of mixed samples for researching and developing new

materials.

(3)Automatically judge whether density is qualified or not and prompt alarm.

(4)Function of automatic zero tracking,buzzer warning,and overload warning.

(5)Function of solution compensation.necessary if liquid other than water is used as a medium for measurement.

(6)Function of setting actual water temperature,measuring medium density,and water proof medium density.

(7)Function of setting aerostatic buoyancy and the bound of density.

(8)About the solid mode,adopt the unicase high-capacity measurement accessories with the

Transparent injection mould tank,which can resist wear,fall off,and corrosion.

(9)About the liquid mode, density value can be displayed by one procedure.and repeatedly

continuous speediness measurement can be worked.

(10)Density value of samples with the temperature from normal to 100 centigrade can be measured.

Take samples conveniently.and 50CC would be okay.

(11)It is very easy to clean the measurement cup,and can’t got the limitation of the size of pycnometer caliber.

(12)Adopt the unicase stainless steel measuring hook.

(13)Coordinate with the operation of thermostatic tank to measure the proportion with the required temperature.

(14)Function of displaying concentration of density and baume.

(15)Adopt the unicase dedicated wind and dust cover,which makes the combination convenient and durable.

(16)Volatile liquid,corrosivity liquid,vicidity liquid,strong acid and strong lye liquid can be measured quickly.

(17)Interface of RS-232C is included.the printer of DE-40 will be available to connect PC with printer.

Measurement Procedure of Solid Model:

Place sample on test board to measure weight in air,and then press ENTER button to memory.

Place sample into water to measure weight,and then press ENTER button to memory.The density value can be displayed.

Measurement Procedure of Liquid Model:

Place beaker with samples on testing board.and take off weight of pothook.

Make standard weigh hanged on pothook and submerged in liquid to be test totally.and then press ENTER button to memory.Density valuve can be displayed.

Measurement Procedure of HydroscopicityProducts:

Place the sample on the test board to measure the weight in the air,and then press

the ENTER button to memory.

Place the sample that did the waterproof treatment into the water to measure the

weight in the water,and then press the ENTER button to memory.show the density value.

Instruction Table

brand		DAHOMETER
model		DA-300T
density resolution		0.001 g/cm3
Weight range		0.005~300g
Density range		0.001—99.999g/cm3
Solid mode	Measuring solid items	Density of all forms of solid,including metal,rubber,plastic,film,floating body,powder,foam,viscous body,structure,tubing,wood,sponge,glass,pitch,cement,soil,gem,paper,concrete,graphite,coal,rock,ceramic.etc.(cover the products of hydroscopicity,non-absorbency,high – viscosity)
	Measuring mode	Archimedes principle A.general solid measuring method B.porosity materials saturation mode C.porosity materials surface covering method mode. fessional constant volume mode method fessional rubber abrasion loss and expansibility mode method fessional hydroscopicity mode method fessional oil length mode method
	Measurable project	density of general non-absorbency solid density of porosity materials oil length of oil bearing porosity of porosity materials DIN volume abrasion loss of rubber powder density water absorption rate
	Measuring time	About 5 seconds
	Memory method	two procedures
	Specific gravity measurement frame	unicase injection forming professional specific gravity mesaturement frame (size:length13.5mm×wide5mm×high11.6mm)
	Measurement tank	unicase injection forming transparent professional measurement tank (size:length16.9mm×wide9.8mm×high8.3mm)
	Result disply	Disply according to the model:density,specific gravity,apparent density,volume density,wet density,total porosity,effective porosity,oil content,water absorption,wear loss,wear index,expansibility,volume and so on.
	Funtion setting	Water temperature setting,density setting of medium of comparative solution,density setting of medium of waterproofing treatment ,boung setting,aerostatic buoyancy setting, Loss value setting of fixed weight of reference glue,loss value setting of weight of reference glue,density setting of reference glue.
	Mixed material percentage	Function introduction	automatically read the percentage of the main material in the two kinds of mixed materials
		setting	freely set the density value of main material and subordinate material
		disply	density value,percentage of main material
liquid mode	Measurement type	a:mobility liquid,vicidity liquid,volatile liquid,corrosivity liquid,high temperature liquid,suspension liquid,emulsion and so on. b:alcohol,scaling powder,essence,blood,sodium chloride,glycerol,electrolyte,diesel,refrigerating,hydrofluoric acid,dichloromethane,vitriol
	Measurement principle	Archimedes principle displacement method
	Measurement mode	1 group
	Measurement time	about 5 seconds
	Memory mode	memory in shorter time by one procedure
	Result disply	Density and baume
	Specific Gravity Measurement frame	stainless steel specific gravity measurement frame
	Function setting	Temperature setting,density setting, measurement weights setting of standard sensor ball and weights setting in the water
	Measurement testing	distilled testing
Calibration mode		auto correction with one button,auto detection.
Output mode		standard interface of RS-232,output and Print testing data conveniently
Standard accessories		Host,tank,test board,tweezers,thermometer,100G weight,wind and dust cover,a set of measuring floating body parts ,power transformer,DE-20A standard liquid measurement assembly
Optional accessories		DE-40 printer,DE-20B anti corrosive liquid measurement assembly
power		AC~220V / 50HZ
Main feature		data display,accuracy,speediness,convenience Durable,economy

Packaging & Shipping

Packing size:42 X 16 X 32cm

Items will be shipped out within 2 days upon verification payment.

Items will be shipped out via:

air shippment
International Express: DHL/UPS/FEDEX/TNT .it will take around 5 to 7 days to get your door given considering everything goes well.

Our Services

As leading manufacturer of densimeter,we guarantee below:

100% Competitive price we are the original manufacturer of densimeter for years, the large scale production make our products more competitive, that’s the reason we are very confident to offer the most possible competitive price for the same level testing instruments in the world.
High quality standards we have the powerful professional researching and technology team to support quality;Our quality has been proved by the good market reaction for years;Our product are built to meet the industrial standards and global standards;Every instrument get checked and approved by our QC before delivery.
Faultless service we have the professional customer service team to provide the one to one service for you;we can help you to enjoy the one-stop service without any worries;we have the completed after-sales service policy and quality insurance policy;we guarantee instruments for one year and life-long maintenance(Gold Purity Tester for two years)
Efficient logistics we have the stable partner to help us to deliver the goods to the any corner of the worldwide shortly.Air shipment;International express:DHL/UPS/FEDEX/TNT(5 days to 7 days)
OEM service We are the original manufacturer of densimeter,that is verified by the third party and Alibaba on site;We can provide you OEM service and print your logo on the instruments.