DA-300M/DA-600M/DA-900M/DA-1200M

Original Factory Supply Oil Content Analyzer , Oil Content Meter , oil content testing machine for Oil Bearing 

Shorter measuring time,Multifunction,0.001 g/cm3 density resolution,Can be applied to porous material.

Standards: According to ASTM D792,GB/T1033,GB/T2951,JIS K6268,ISO 2781,ISO

1183,GB/T208,GB/T5163,GB/T 1933 standards etc

No need to open and close the lid with the completed aluminum alloy measuring table; Simple operation and conform to the new materials laboratory operation specification; automatically judge whether the sample is qualified or not; Function of warning and measuring the volume abrasion value DIN of rubber,of Akron,and expansibility; Measuring the true density with pycnometer method for powder material; Function of waterproofing treatment with boiling saturation method,impregnated saturation method,vacuum saturation method,surface sealing wax covering method,and surface vaseline covering method,and automatic measuring the porosity,oil content and water absorption; The purity of the main material in two kinds of mixture also can be measured.

Specification:

Mode:       DA-300M                   

Measuring range: 0.001—99.999g/cm3         

Minimum weight: 0.005g                     
Maximum weight: 300g                      
Resolution: 0.001 g/cm3                     

Mode:       DA-600M                   

Measuring range: 0.001—99.999g/cm3         

Minimum weight: 0.005g                     
Maximum weight: 600g                      
Resolution: 0.001 g/cm3    

Mode:       DA-900M                   

Measuring range: 0.001—99.999g/cm3         

Minimum weight: 0.01g                     
Maximum weight: 900g                      
Resolution: 0.001 g/cm3

Mode:       DA-1200M                   

Measuring range: 0.001—99.999g/cm3         

Minimum weight: 0.01g                     
Maximum weight: 1200g                      
Resolution: 0.001 g/cm3    

Features:

(1)No need to open and close the lid; Simple operation;Shorter time; According to the specification of new materials laboratory.

(2)Show the percentage composition of mixed samples for researching and developing new materials.

(3)Automatically judge whether the sample is qualified or not;prompt alarm.

(4)Function of automatic zero tracking,buzzer warning,and overload warning.

(5)Function of solution compensation.either water or liquid can be used as medium.

(6)Function of setting actual water temperature,measuring medium density,and water proof medium density.

(7)Function of setting aerostatic buoyancy compensation and the bound of density.

(8)Adopt the completed high-capacity measurement accessories with the transparent injection moulding sink,which can resist wear,fall off,and corrosion.

(9)Adopt the completed special windproof and dustproof cover,which makes the structure convenient and durable.

(10)Interface of RS-232C is included.the printer of DE-40 is available to connect PC with instrument.

Standard Accessories:

Host,Sink,Test board,Tweezer,Thermometer,100G weight,Windproof and dustproof cover,A set of measuring grain accessories,A set of measuring floating body accessories,Power Transformer

Measurement Procedure of Non-hydroscopicity Products:

(1)Place sample on test board to measure weight in air,and then press ENTER button to

memory.

(2)Place the sample into water to measure weight in water,and then press the ENTER button to memory. Density value is displayed.

Measurement Procedure of Hydroscopicity Products:

(1)Place sample on the test board to measure weight in air,and then press the ENTER button to memory.

(2)Place sample that did waterproof treatment into water to measure weight in water, and

then press the ENTER button to memory. Density value is displayed.

Items will be shipped out via:

• air shippment
• International Express: DHL/UPS/FEDEX/TNT .it will take around 5 to 7 days to get your door given considering everything goes well.