High-performance.direct displaying data,millesimal precision

Application:

Standards:According to ASTM D792,GB/T1033,GB/T2951,JIS K6268,ISO 2781,ISO 1183,GB/T208,GB/T5163,GB/T 1933 standards etc.

DH-300 is one of the densimeter that have been widely applying in industry,as the medium of water,the density value can be displayed after two steps.Compared with traditional densimeter,there is no calculation by hand,which is more convenient.

With completed injection moulding testing plat,and the high transparency water sink that built in imported PC.Testers can inspect the samples in water clearly.the suspension wire made up of 0.5mm stainless steel is perpendicular to nacelle,which would not touch the water sink,therefore accuracy of the test result can be ensured.DH-300 also can be applied to metal,powder,ceramics,fireproofing materials,magnetic materials,mechanical parts,mineral and rock,cement,precious metal,jewellery.,etc.

Specification:

Mold: DH-300 

Density Resolution: 0.001 g/cm3 

Maximum Weight: 300g 

Minimum Weight: 0.005g 

Measuring Range: 0.001—99.999g/cm3 

Mold: DH-600 

Density Resolution: 0.001 g/cm3 

Maximum Weight: 600g 

Minimum Weight: 0.005g 

Measuring Range: 0.001—99.999g/cm3 

Mold: DH-900 

Density Resolution: 0.001 g/cm3 

Maximum Weight: 900g 

Minimum Weight: 0.01g 

Measuring Range: 0.001—99.999g/cm3 

Features:

• Fasting testing,more efficiency,can be applied in production site and laboratory.
• Plastic particle,film,floating,seal ring,rubber,calcium carbonate powder can get quick tested.
• Rubber DIN volume wear loss,Akron wear loss,expansion can be reading directly.
• Function of automatic zero tracking,buzzer warning,and overload warning.
• Function of solution compensation.necessary if liquid other than water is used as a medium for measurement.
• Adopt the completed high-capacity measurement accessories with the transparent injection moulding sink,which can resist wear,fall off,and corrosion.
• Adopt the completed professional windproof and dustproof cover,which makes the machine convenient and durable.
• Interface of RS-232C is included.the printer of DE-40 is available to connect PC with this instrument.

Standard Accessories:

Host,Sink,Test board,Tweezer,Thermometer,100G weight,Windproof and dustproof cover,A set of measuring grain accessories,A set of measuring floating body accessories,Power Transformer

Measurement Procedure:

1. Place sample on test board to measure weight in air,press ENTER key to memory.
2.  Place sample into water to measure weight in water,press ENTER key to memory.Density value will be displayed.