CNC450B-1 horizontal turret lathe with slant bed / cnc lathe machine cutting tools
Technical parameters
Technical specification | Model--CNC450B-1 |
Max.swing diameter on bed | 450mm, |
Hydraulic third gear spindle speed range | 3000RPM |
Max. turning length | 550mm |
Main motor power(Frequency conversion) | 7.5KW |
Max. turning diameter | 350 mm |
X/ZFeed motor power | 6/10N.m |
Spindle types of end | A8
|
Maximum workpiece swing diameter skateboard | Φ280mm |
Cutting speed m/min | 0-5000m/min |
Center - from the ground | 1200mm |
Number of tools | 8 |
X/Z Rapid traverse | 30000mm/min |
Hydraulic chuck | φ200Xφ50mm |
Carrier transfer time (one station) | 0.4(Horizontal8)s
|
Front spindle bore taper | MT6 |
The turret repeat positioning accuracy | 0.008mm |
Spindle bore | φ60mm |
X:Stroke | 300mm |
Two top distance | 500mm
|
Z:Stroke | 850mm |
Hydraulic tailstock quill diameter / stroke | φ65/120mm
|
Machine weight | 4000Kg |
Tailstock taper taper | MT4 |
Workpiece accuracy | IT6-IT7 |
X/Z Positioning accuracy | 0.01/0.008mm |
Surface roughness | Ra1.6μm |
X/Z Repeat positioning accuracy | 0.005/0.008mm |
Turret form Horizontal | 8Station(Servo) |
Total installed capacity | 10KW |
Arbor size | 25×25 |
Rail width | 380mm |
Bed slope | 45° |
Standard configuration:
1. Control system: GSK
2. Solid hydraulic chuck
3. Horizontal 8-station HYDRAULIC turret
4. Automatic lubrication system
5. Coolant system
6. Fully enclosed protection system
7.Hydraulic tailstock
8. Spindle hydraulic third gear, Frequency stepless speed regulation
Optional configurations:
1.the spindle servo speed control
2.The installation of the chip conveyor
3.The installation of feeder
4.Siemens or Fanuc controller system
welcome to our company! looking forward to your cooperations!!!