Angle Production Line- Steel Angle Punching Production Line/CNC Angle Punching Line
Product Basic Parameter:
Model | TPPD103 | TPPRD103 | ||
Max size of work piece L×W(mm) | 1500×800 | |||
Max. punching diameter (mm) | Φ26 | |||
Plate punching thickNess (mm) | 5~25(Q235) | 5~25(Q345) 5~20(Q420) | ||
Max. drilling diameter (mm) | Φ50 | |||
Max. drilling thickNess (mm) | 40 | |||
Punching force (kN) | 1000 | 1200 | ||
Marking force (kN) | 800 | 1000 | ||
Min. distance between hole and plate edge (mm) | Punching | 25 | ||
Drilling | Depends on hole diameter | |||
Character dimension (mm) | 14×10×19 | |||
Qty. of character | 12 | 16 | ||
Die-stations | 4 | |||
Feeding speed of drilling(mm/min) | 25~280 | |||
Stroke of drilling spindle(mm) | 180 | |||
Rotation speed of drilling spindle(r/min) | 120~560 | |||
Programming mode | Auto CAD or lofting software | |||
Overall dimensions L×W×H (mm) | 3200×3000×2600 | 3300×3200×2600 | ||
Machine weight (Kg) | 5800 | 7000 | ||
TPPD103 The Main Machine
The main machine is a special hydraulic press which is equipped with pressure apparatus and drill drift holding device. There are three drill drifts on the holding device. They are used to install punch and marking apparatus.The body of the machine uses Type C double-plate jointing structure with the advantage of rigid and high power of anti-eccentric load. The main cylinder is fixed on the body by four high strength bolts which is easy to install and convenient for maintenance.
| |
| High tensile TPPRD103, more bigger and stronger | Common TPPD103 |
CNC feeding worktable can be divided into fixed part and movable part. The fixed part is set on the ground which is linked with main unit. To the fixed part, alongside the front-back direction of main unit is called Axis Y, and then the fixed part is called Axis Y rack. The movable part is installed on the Axis Y rack through the guide bush which is rolling in straight line, under the driven by the servo motor and ball screw shaft, the movable part is running though the Axis Y to realize precise positioning. To the movable part, alongside the left-right direction of main engine is called Axis X, and then the movable part is called Axis X rack. Axis X rack is closed to the head of the main engine, on both sides which is installed a supporting plate with universal transmission ball to support the work piece. At the back of the Axis X rack, two rolling guide bushes are installed with a sliding plate on the direction of Axis X. Under the driven by the servo motor and ball screw shaft, the sliding plate can running though the Axis X to realize precise positioning.
This drilling unit enjoys compact design, powerful engine and high efficiency. With the automatic signal transmission device which can send signals automatically when the drill touches the work piece and finishes punching, the drilling machine possesses the empty run fast forward function and instant transfer to processing function when touches with work piece. After finishes drilling, it can be returned with high speed. In other word, during the drilling work, this drill machine does not need to make any adjustment according to the variation of the lengthen of drill bit or the thickness of the plate, as a result, this drill machine can largely diminish the non-operation time to improve the efficiency. The drilling and drawing force of the main bearing is provided by the gear driven while the feeding power is driven by the hydraulic cylinder. |
The distance from the upper point of the drilling spindle (without a drill in the spindle) up to the table surface is 180mm, we designed this distance can satisfy the Max. drill dimater 50mm. And the drill spindle adopts hydraulic feeding, can control the stroke itself, when the drill head touch the workpieces, it will turn to feeding (you just need to adjust the feeding speed), don't need measure the length of drill manually. |
The Punching Unit
Three position - One for marking, two for punching
|
|
There are one service position of marking and two positions of punching on the machine. While in marking, put the required characters into the character box and fill the vacancy with blank characters, then screw the bolts to tight, insert the character box to the fixed groove at the top of the piston rod. The punching mould shall be selected in accordance with the aperture and plate thickness. The punch is fixed on the rod to tighten the screw, and put the hollowing block into the base of cavity die. |
The Electrical Cabinet
| ||
| ||
| ||
The power supply of this CNC punching machine for joint plates is AC380V, 35KVA, and distributed to a drive supply of AC415V, AC200V and a control supply of AC220V by master switch QF1, servo transformer, and control transformer. The drive supply of AC415V is for the motor of oil pump; the drive supply of AC200V is for servo motor; the control supply of AC220V is for CNC, DC24V regulated power supply, AC contactor, and magnet valves. The DC24V supply is for servo drive, CNC system, PLC and proximity switch. |
Work pieces
Packaging For Foreign Customers (For One Punching Machine Need One 20GP Container) | |
| |
| |
When package the machines , our workers will fasten every parts by steel wire rope, so as to when the machine on road, it will not move, ensure security of cargo.
QUALITY MAKE BRAND, HONESTY WIN MARKET! INNOVATION PROMOTE DEVELOPMENT, HARMONY CONVERGE TALENTS.
THANKS FOR ALL CUSTOMERS BELIEVE AND CHOOSE SUNRISE CNC. | |