This lathe is a conventional one with gap, the available width inside which is 210mm, therefore, the maximum swing diameter of this lathe is 630mm. Lathes of this kind are suitable for fuming intemal, external and cylindrical surfaces as well as other rotary surfaces. They can be used for turning different metric, inch, module and diametral threads and can also be used for performing reaming and broaching oil grooves etc.
structure features:
The bed is wider than that of the common ones, also with high rigidity, as the surface of the bedways is hardened by medium frequency induction, therefore, it is very durable.
The lathe is very convenient and concentrated to operate with quick movement structure on the slides.
The lathe also exceeds others in structure and delivery rigidity, as well as efficiency, and its suitable for cutting under high speed. In addition, it also has a big spindle bore and complete accessories.

item	unit	specification
Model number		CA6266B*2000mm
Max swing diameter over bed	mm	660
Max swing diameter over carriage	mm	400
Swing over gap X width in gap	mm	870×210
Distance between two centers	mm	2000
Spindle bore	mm	52
Spindle nose		Morse No.6
Width of the bed	mm	400
Hardness of the bedways	RC	52
Spindle speed range24	r/min	10-1600 for 50Hz electric power 12-1680 for 60Hz electric power
feed range(standard)	mm/r	0.08-1.59
feed range(fine feeding)	mm/r	0.028-0.054
feed range (bulk feeding)	mm/r	1.71-6.33
Metrical thread range(44 kinds)	mm	1-192
whitworth thread range(20 kinds)	tpi	24-2
module thread range(39 kinds)	mm	0.25-48
diametral pitch thread range(37 kinds)	DP	96-1
Main motor	kW	7.5