Product Details

XK7136 china cnc milling machine atc controller siemens 808d

Specification	UNIT	XK7136
Table size	MM	1370*360
Spindle hole taper		BT40
Travel range	MM	900360500
NO./width/distance of T-slot	MM	3-14-95
Max.load of table	KG	400
Distance from spindle nose to table surface	MM	100-600
Distance from spindle axis to vertical guideway	MM	410
Rapid feed speed	M/MIN	12
Feed speed	MM/MIN	4000
Spindle speed	R/MIN	8000
Spindle motor power	KW	3.7
Positioning accuracy	MM	±0.02
Repeat position accuracy	MM	±0.01
Overall dimension(L×W×H)	MM	2200x1850x2350
Net weight	KG	2500

Standard Configuration:

1. High strength resin sand casting

2. KY1000M CNC Controller

3. BT40 spindle unit 8000rpm

4. Separate the hand wheel

5. Pneumatic broach system

6. Semi guard

7. Automatic intermittent lubrication

1.XK7136 china cnc milling machine atc controller siemens 808d are made of high quality resin sand wear resistant castings, strong and tough, super-large vertical column, wide and low base, honeycomb structure.After two annealing treatment and vibration aging, the removal stress is guaranteed to be permanent.
2. The three-axis of XK7136 china cnc milling machine atc controller siemens 808d adopts a strong rectangular guide rail, which can withstand heavy cutting and precision grinding of the worktable. All non-sliding surfaces of the guide rail are treated with ultra-high frequency quenching, which greatly enhances the surface hardness.The guideway sliding surface inlaid with imported guide rail has greatly increased the abrasion resistance of the guide rail and improved the service life of the machine tool.
3. The triaxial transmission adopts high precision and high rigid ball screw pair, and the special bearing is installed to ensure the positioning accuracy and repeated positioning accuracy.
4. The three axes adopt the domestic absolute value servo motor and spindle motor, providing a strong driving force, ensuring the accuracy of feeding in the strong bearing capacity.
5. All three shafts are directly connected, and high precision couplings are used to ensure the driving capacity of each shaft.
6. Adopt high rigidity and high precision spindle to ensure high reliability, long life, small noise, small vibration and high precision.
7. All axes adopt the sealed machine guide shield, effective protection guide and lead screw, extend its service life.
8. XK7136 china cnc milling machine atc controller siemens 808d Adopt the KND numerical control system, adopt the supporting servo motor and the drive, ensure the stability of the control system is high, the speed is fast, the surface is smooth, the precision is high.
9. High efficiency dual automatic lubrication system: the guide lubrication adopts the volume distributor to match the oil injection, to ration the oil needed for the guide rail, to reduce the waste of lubricating oil and to avoid environmental pollution.
10. The wiring in the electrical cabinet is in line with the national electrical safety standard to ensure that the control system is operated without external interference.Using heat exchanger, the hot air in the electric cabinet is discharged rapidly, keeping the constant temperature in the box, so that the control system can operate for a long time.
11.XK7136 china cnc milling machine atc controller siemens 808d High precision pitch compensation, each transmission shaft adopts high precision laser measuring instrument to make the positioning accuracy of each axis more accurate, more suitable for machining high-precision parts and die making.
12. The external protection adopts the three-dimensional semi-protection, all the materials are standard steel plates of 2mm, ensuring the safety of the machine tools.

Company Information

Taian Lu Young Machinery Co., Ltd is a modern and high- tech company which is a professional manufacturer of CNC LATHE, CNC MILLING, CNC MACHINE CENTER . With 50000sqm workshops and offices, we have more than 20 years experiences in cnc machine research and production.Our products all pass CE Certification,and our factory pass ISO9001Quality Certification.Our machines have been exported more than 40 countries and have been well received by our customers.we welcome all customers and friends come to visitour factory! Regarding the technical force, we have the most professional research and development staff, who can meet all different requirements on.

Who choose us ?

We have 20 years of accumulated experience in CNC lathe and CNC milling machine,so our products has been exported more than 40 countries. We have professional engineers who are responsible for every product we export. Because of our high degree of professionalism , good quality, factory price and the best service,more and more customers choose us, so our export volume of products increased by 20 percent compared with last year.

Packaging & Shipping

The packaging and shipping of XK7136 china cnc milling machine atc controller siemens 808d:

On the mechanical packaging, we use the fumigation-free plywood.Fumigation-free wooden keel support bar is adopted by the export of LVL material, wood is made from multi-layer plywood custom-made, multi-layer plywood and LVL material are after high temperature sterilization and glue them into a wooden . The wooden box itself does not have any log, so it does not need to be fumigated to be exported directly.The goods are well packed in good condition and can prevent the breakage and leakage of the contents during the shipping process.We will adopt Marine transportation to prevent the turbulence and vibration of the transportation process from causing damage to the goods and ensure that the goods are safe and sound when delivered.

Why choose us?

1.Company strength.We have 20 years experiences for cnc machine profuction.
2.Friendly price.We supply friendly factory price to help you establish your advantage in your local market
3.Training for free. We can supply training for you in our factory for free.Oversea service also is OK.
4.Relationship.We will establish long-term relationship with our clients.

Our service

1.Professional technogoly service team.we have professional technogoly service team , we supply one by one solution design for your request.
2.Training for free and oversea service.we can supply training for your in our factory for free.Oversea service also is OK.
3.7*24 hours online sales.We supply 7*24 hours online sales and after sales service for free.And we welcome customers to visit our workshop and products at any time.
4.Replacement parts for free.We supply replacement parts for free if the machine is proved defective within 12 months.

Exhibition Hall

Our company has exported all kinds of mechanical products to more than 40 countries.We provide suitable products for different countries and provide the best and most thoughtful service for our customers.
We attended a lot of mechanical trade fair, in the fair, we talk about products with customers, and invite customers to visit our production workshop, understanding of mechanical manufacturing process, thus expanding the overseas market. If customers have special product requirements, we can also customize them according to customer needs.

FAQ

1. What’s the term of payment ?

As usual, Our term of payment is:
30% downpayment by T/T (Telegraphic transfer ) in advance.
70% by T/T before shipment.
Besides, We can also accept term of payment by irrevocable letter of credit at sight. D/P or D/A.

2. What’s the quality warranty ?

We will supply standard parts and accessories with our machines when shipment. Within one year after receiving our machines, In the right operation, If there are any damaged parts or accessories, We will replace them by air-mail or express mail immediately free of charge.

3. What’s the delivery time ?

We will supply goods to you within 1 months after getting your 30% downpayment by T/T according to the different products.

4. What’s the charge of installing and commissioning ?

For some machines, It need our technician to go to your local site and help you install and commission machines. At the same time, Our technician will train your workers. It will take 7-15 days for different machines. The return air-tickets, accommodation, food, salary ( USD60.00/day for every technician ),etc will be born by the end-user.