Product Details

shaper machine BC6063,BC6066,BC6085,BC60100

Product Description

Features:

B635A Shaper is mainly used for the production of small parts of planing on flat single and small batch, forming surface and grooves.
B635A Shaper five main features are:
1: planer table can turn around point of view, the structure of the table with a lateral and mobile lifting of; for planing inclined plane, thereby expanding the scope of use.
2: planer feed system uses a cam mechanism, adjust the feed rate. Take the knife to change the amount, very convenient.
3: walking planer knife system built with an overload safety agencies, when due to the careless operation or by external influence and cutting overloaded, take the knife to slip on their own, non-destructive mechanical guarantee the normal operation of the machine.
4: Inter-ram and bed rail and the main gear and sliding pay with speed rail surface, have played a lubricating oil pump lubrication cycle.
5: planer is equipped with parking brake mechanism, so conversion speed. When you start and stop the machine, may not have to cut off the power.

Shaper live ram for horizontal linear reciprocating, rotary turret can be multiple angles in the vertical plane, and manual feed table with the workpiece for intermittent motion horizontal or vertical feed for machining plane, ditch slots and dovetail surfaces, etc., can also be used for processing forming surface, the use of live reciprocating cutting tool is fixed on the machine on the platform of the workpiece.

Specification:

Model		BC6050	BC6063/BC6066	BC60100
Max. shaping length		500mm	630/660mm	1000mm
Max. range of the horizontal movement of the table		525mm	385mm	800mm
Max. distance between the ram bottom and table		370mm	630mm	400mm
Max. length of the vertical movement of table		270mm	360mm	380mm
Dimension of the table top(LxW)		440x360mm	630x400mm	1000x500mm
			660x400mm
Max.stroke length of the toolhead		120mm	120mm	160mm
Max.swivel angle of the toolhead		±60°	±60°	±60°
Max. section of tool(WxT)mm		20x30mm	20x30mm	30x45mm
Number of ram reciprocation per minute		14-80	14,20,28,40,56,80	15,20,29,42,58,83
Range of table feed	Horizontal feed	0.2-0.25mm/recip	0.2-0.26mm/recip	0.3-3mm/recip
	Vertical feed	0.08-1mm/recip	0.08-2mm/recip	0.15-0.5mm/recip
Rapid travel of table	Horizontal feed	0.95mm/recip	—	3mm/recip
	Vertical feed	0.38mm/recip		0.5mm/recip
Width of T-slot for center positioning		18mm	18mm	22mm
Power fo the main motor		3kW	3kW	7.5kW
N.W./G.W.		1650/1750kg	1750/1870kg	4870/5150kg
			1800/1920mm
Overall dimensions(LxWxH)		1900x1200x1450mm	2342x1225x1480mm	3640x1575x1780mm
			2357x1225x1480mm

Detail Photo: