Such cnc tapping center has following features:
1. the foundation, column, main spindle box, cross sliding table, worktable and other parts were designed with high strength casting technology.
2. the inner metallographic structure is very steady.
3. the casting parts show rational geometry composition through machine tool kinetics and finite element analysis.
4. the basic parts have high steel nature by collocating with the reinforcing rib.
5. with the wide foundation, box-shaped cavity column, broaden & lengthening sliding base and advanced design of mechanics of materials, the weight capacity can be ensured.
6. High speed and high precision spindle, max. can be 24000rpm:
7. CE Standard and CE Certificate;
Specifications | Unit | TD500A cnc tapping center |
Table size (L × W) | mm | 650×400 |
Table load Max | kgs | 300 |
X travel | mm | 500 |
Y travel | mm | 400 |
Z travel | mm | 330 |
Distance from spindle center line to column guide way surface | mm | 400 |
Distance from spindle nose end face to table upper surface | mm | 150~480 |
X/Y/Z cutting speed | mm/min | 0~20000 |
X/Y/Z rapid traverse speed | m/min | 48/48/48 |
Spindle speed range | rpm | 50~12000(20000 opt) |
Spindle taper |
| No.30 (7:24 ) |
Spindle motor power | kW | 5.5/3.7 (35/23.5Nm) Mitsubishi M70VA SJ-V5.5-01T |
X/Y/Z servo motor power | kW | 1.5/1.5/2.2 |
Tool magazine capacity / Type |
| 16 T(swing) |
Tool adaptor type |
| BT30 |
Max. Tool weight | kg | 3 |
Max. Tool diameter/length | mm | Ø80/Ø200 |
Time of tool change (T-T) | sec | 1.6 |
|
|
|
T-slot (Numbers × Width × Distance) | mm | 3×14×125 |
Positioning accuracy(National Standard) | mm | X,Y,Z:0.010 |
Repeat positioning accuracy(National Standard) | mm | X,Y,Z:0.006 |
Air pressure requirement(Flow L/min) | MPa | 0.5-0.7(200) |
Overall dimension (L × W × H) | mm | 2040×1580×2155 |
Net weight | kgs | 2350 |
1 | Automatic tool exchange system(ATC) | |
2 | Spiral scraps discharge device | |
3 | All closed shield | |
4 | Simple oil-water separator | |
5 | Automatic lubrication system | |
6 | Rigid Tapping | |
7 | The anchor bolts and spacers | |
8 | M30 Automatic power system | |
9 | Tool box |
|
Pls send inquiry to me for optioanl accessories and other further information about such cnc drilling and tapping center.
Payment Term:
1. 30% down payment, 70% by T/T before shipment;
2. 100% LC at sight(optional and shall be discussed before placing order);
Minimum Order Quantity:
1. 1 Set;
2. ≥2 sets, there will be much discounts.
Warranty:
1. Normally, 12 months for parts as of delivery of the machines;
Shipment:
1. For machine itself, by sea or train(inland countries).
2. For documents, by international express. eg DHL, TNT or EMS.